WIIZARD: Control a Softmodded Wii from Your Agent

    1

    Remotely control, file-manage, and calibrate softmodded Wii consoles and arcade cabinets over a LAN.

    $5

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    WIIZARD: Control a Softmodded Wii from Your Agent

    Example session with this skill installed

    Check the status of my Wii consoles and take a screenshot of the one named 'arcade-cab'.

    • Read your context and instructions
    • Compiled the wiizard

    Summary

    Found 1 Wii on your network running the WIIZARD agent, and captured its screen.

    WiiIPStateStorage (sd:/)Uptime
    arcade-cab192.168.1.45wii-agent running9.8 GB free of 29.7 GB2 h 14 m

    Screen: the launcher is in attract mode, cycling gameplay clips with PRESS A TO PLAY. No game is running, so the cabinet is idle and ready.

    (screenshot shown inline in the session)

    What I checked

    1. status scanned the LAN: one Wii answered on the agent port; none are sitting in the Homebrew Channel.
    2. screenshot captured the launcher's front framebuffer (games themselves can't be captured, only the launcher and agent screens).

    Next steps

    • games lists what's installed (GameCube, Wii, Neo Geo, CPS-1); filter by name or system.
    • play starts a game the way the launcher would. The agent goes quiet until the game exits, so run status again afterwards.
    • If the picture is cut off on the CRT, screen shows edge markers for 20 s and I'll adjust once you tell me which edges are hidden.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Managing a softmodded Wii usually requires a Wii Remote, a physical SD card reader, and manual file shuffling. This skill allows you to control, configure, and transfer files to a Wii console or arcade cabinet over the network using the WIIZARD MCP server.

    What it does

    • Remote Navigation presses buttons like A, B, Home, and D-pad directions to navigate menus without a controller.
    • File Management uploads, downloads, and deletes files on the SD card or USB drive at speeds up to 1 MB/s.
    • Visual Feedback captures remote screenshots of the current Wii screen to verify state and menu position.
    • Library Launching starts homebrew apps, .dol files, or games from the library via command.
    • Display Calibration adjusts overscan width, height, and offsets for CRT monitors using visual edge markers.
    • System Configuration manages Priiloader autoboot settings and checks NAND system files.

    How it works

    1. Discovery uses status to scan the LAN for Wiis running the agent or sitting in the Homebrew Channel.
    2. Initialization deploys the agent via start_agent if the console is in the Homebrew Channel.
    3. Execution sends commands for file transfers, button presses, or game launches based on your request.
    4. Verification takes a screenshot after navigation commands to confirm the intended screen was reached.

    Frameworks & tools

    This skill requires a softmodded Wii with the Homebrew Channel installed. It interfaces with the WIIZARD MCP server (wii_mcp.py) and utilizes wiiload for initial agent deployment over TCP port 4299.

    Why this beats prompting it yourself

    Standard prompts do not understand the specific state transitions required between the Homebrew Channel and the WIIZARD agent. This skill handles the sequencing of status checks, file path conventions for Wii-specific storage, and safety protocols for NAND interaction that prevent accidental bricks.

    Use cases

    • Install homebrew apps by transferring folders to sd:/apps/ and launching them.
    • Adjust overscan on a CRT arcade cabinet without opening the back of the monitor.
    • Verify if a remote arcade cabinet is powered on and displaying the correct game menu.
    • Back up or restore specific configuration files from the Wii SD card to a PC.

    Known limitations

    The agent is unreachable while a game or homebrew app is running until it exits back to the loader. Wi-Fi transfers are capped at approximately 1 MB/s. Screenshot capture only works within the agent or launcher, not inside games.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Workflow Automation.

    Agent is unreachable during active gameplay. Screenshot tool only works in launcher. Wi-Fi speeds limited to ~1MB/s. No support for supplying ROMs or console keys.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 5 days ago

    Software
    GitSoftmodded Wii with the Homebrew ChannelPython 3WIIZARD MCP server (free, github.com/hotdog-face/wiizard)

    Wii and computer on the same home network.

    Permissions

    Terminal / Shell
    Read Files
    Network Access
    Write Files
    Listed5 days ago

    What's inside

    Frequently Asked Questions

    The skill automates the management of softmodded Wii consoles by allowing for remote file transfers, menu navigation, and system calibration over your local network, eliminating the need for physical SD card swapping or a Wii Remote.

    A softmodded Wii with the Homebrew Channel, Python 3 on your computer, and the free WIIZARD MCP server from github.com/hotdog-face/wiizard. The Wii and your computer must be on the same home network.

    Mostly no. Once a game or homebrew app is launched, the Wii is unreachable until it returns to the WIIZARD launcher. The exception is arcade games running in WIIZARD's RetroArch build: the skill can check what's playing and quit back to the launcher. NAND access is read-only apart from Priiloader's autoboot settings, which are backed up before any change.

    The skill itself: a SKILL.md that teaches your agent how to use the WIIZARD MCP server's tools safely and in the right order, with setup steps, rules and common recipes. The MCP server and launcher are open source (MIT) and free on GitHub; you install them separately.

    The skill uses the `status` command to automatically scan your network for active consoles, and the `start_agent` function handles the initial deployment to the Wii via the standard TCP port 4299.

    File transfers over the Wii's legacy Wi-Fi hardware are capped at approximately 1 MB/s, making it ideal for homebrew apps and configuration files, though larger disk images will take more time.

    New in Workflow Automation