Vita Agent Bridge: Let Your Agent See and Use a PS Vita

    1

    Control and automate a PS Vita via MCP for homebrew testing, file management, and remote interaction.

    $7

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    Vita Agent Bridge: Let Your Agent See and Use a PS Vita

    Example session with this skill installed

    Install ~/Downloads/MyHomebrew.vpk on my Vita and check it shows up on the home screen.

    • Read your context and instructions
    • Compiled the vita agent bridge

    Summary

    Installed MyHomebrew.vpk with VitaShell and confirmed its bubble is on the home screen. Took 6 screenshots along the way to check each step.

    What I did

    StepToolResult
    1. Check the consolevita_status, vita_screenshotHome screen, no app open, unlocked
    2. Keep it awakevita_keep_awake trueWi-Fi stays up during the transfer
    3. Copy the VPKvita_upload_file → ux0:data/MyHomebrew.vpk18.4 MB, SHA-256 verified on the console
    4. Open VitaShellvita_launch VITASHELLVitaShell file list on screen
    5. Find the filevita_press down ×3, cross into ux0:data/Cursor on MyHomebrew.vpk (checked by screenshot)
    6. Installvita_press cross, then cross on each prompt"Install successful"
    7. Verifyvita_close_app, vita_screenshotNew bubble on page 2 of the home screen

    Notes

    • The home screen ignores injected buttons, so I used vita_press only inside VitaShell and would switch to vita_tap for any shell dialog.
    • I left ux0:data/MyHomebrew.vpk in place. Want me to delete it to free 18.4 MB?

    Next steps

    • Say "launch it" and I'll start it with vita_launch and screenshot the first screen.
    • If it crashes on boot, I can pull its log from ux0:data/ while you watch.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Developing or testing PlayStation Vita homebrew requires constant context switching between a PC and a handheld. This skill provides an MCP-driven bridge that allows an AI agent to see the console screen and interact with the device directly.

    What it does

    • Remote Vision Captures screenshots at full or half resolution to verify console state and UI.
    • Input Injection Executes button presses inside apps and handles touch or swipe gestures for the system shell and LiveArea.
    • File Management Moves, copies, and deletes files on the memory card, including SHA-256 verified uploads while games are running.
    • Application Control Launches apps by Title ID, handles lock screen gates, and closes active processes.
    • System Maintenance Monitors battery levels, checks free storage space, manages wake locks, and triggers cold reboots.

    How it works

    1. Install the vakern and vabridge plugins to the Vita and configure the TCP bridge on port 1348.
    2. Connect the MCP server to the Vita IP address using the free, open-source MCP server from GitHub.
    3. The agent uses a look-act-look loop, taking a screenshot before and after every interaction to verify success.
    4. Transfers and commands are executed over the local network using a 64-character hex token for authentication.

    Frameworks & tools

    Requires a PS Vita or PSTV running HENkaku Ensō and taiHEN (developed and tested on 3.65). The bridge uses a Python-based MCP server to communicate with the console's kernel and shell plugins.

    Why this beats prompting it yourself

    Standard agents cannot "see" or touch a physical console. This skill encodes hardware-specific quirks, such as the difference between shell touch events and in-app button injection, preventing the agent from getting stuck in infinite loops when system dialogs appear.

    Use cases

    • Automated Testing Upload a homebrew eboot, launch it, and capture screenshots to verify the UI rendered correctly.
    • Remote Installation Transfer VPK files to ux0:data/ and automate the VitaShell installation process.
    • Log Retrieval Fetch crash dumps or debug logs from the console filesystem for immediate analysis in the IDE.
    • Space Management Audit large folders on the memory card and delete old builds or temporary data.

    Known limitations

    Transfers are limited to ~2.2 MB/s. The bridge does not support modern TLS, meaning vita_fetch_url fails on many HTTPS sites. System shell ignores injected button presses (requires touch).

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.

    Requires HENkaku Ensō on firmware 3.65. Transfer speeds capped at 2.2 MB/s. System shell requires touch inputs; button injection only works inside apps. No write access to ur0:tai/ or root paths.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 5 days ago

    Software
    PS Vita
    orPSTV with HENkaku EnsoandtaiHEN
    Python 3vita-agent-bridge pluginsMCP server (free, github.com/hotdog-face/vita-agent-bridge)

    Vita and computer on the same home network. Never port-forward 1348.

    Permissions

    Write Files
    Network Access
    Terminal / Shell
    Read Files
    Listed5 days ago

    What's inside

    Frequently Asked Questions

    The skill bridges the gap between your AI agent and your physical PS Vita, allowing the agent to 'see' the console screen, inject inputs, and manage files via a standard MCP connection, which eliminates the need for manual context switching during development.

    A PS Vita or PSTV with HENkaku Ensō and taiHEN (developed and tested on 3.65), the free vita-agent-bridge plugins and MCP server from github.com/hotdog-face/vita-agent-bridge, Python 3, and the Vita and your computer on the same home network. The bridge listens on TCP 1348 and only opens once you've created your own access token.

    This skill is compatible with any AI agent or IDE that supports the Model Context Protocol (MCP), such as Claude Desktop or specialized coding agents, using the provided Python shim to facilitate communication.

    The bridge uses a look-act-look loop, meaning the agent takes a screenshot to verify the UI state before acting and captures another immediately after to confirm the command was successful.

    The skill itself: a SKILL.md that teaches your agent the look-act-look loop, the Vita's input quirks (touch in the shell, buttons in apps, ○ vs ✕), safe file rules and ready-made recipes. The console plugins and MCP server are open source (MIT) and free on GitHub; you install them separately.

    File transfers are capped at approximately 2.2 MB/s due to Vita hardware constraints, and while the agent can manage files, it cannot bypass the system's lack of modern TLS for direct HTTPS downloads.

    New in Agents & Orchestration