More screenshots

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    Viaduct: PCB Design from a Description

    1

    - Picks 2, 4 or 6 layers by comparing your design with real routed boards, or uses the count you set.

    Free

    Security scanned
    Viaduct: PCB Design from a Description

    Viaduct: PCB Design from a Description

    Example session with this skill installed

    Design a USB-C powered ESP32-C3 board with an RGB status LED, reset and boot buttons, and a 4-pin sensor header. Have it assembled by JLCPCB.

    • Read your context and instructions
    • Compiled the viaduct
    • Generated the UI component

    Summary

    A 2-layer ESP32-C3 sensor node, designed, placed, routed and checked:

    READY TO ORDER. Description to manufacturing files took about 40 seconds.

    Board57 x 41 mm, 2 layers, 20 parts, 14 nets
    PartsESP32-C3-WROOM-02, AMS1117-3.3, USBLC6-2SC6 (ESD), WS2812B-2020, MCP6002, USB-C, 2 buttons
    Routingcomplete, 13 vias
    Layout score98/100 compared with real 2-layer boards
    ERC / DRCno errors / 0 errors, 0 unconnected
    Noise checks13 pass, 3 warn, 0 fail
    Filesfab/c3_sensor-gerbers.zip, c3_sensor-bom.csv, c3_sensor-cpl.csv, c3_sensor.step

    Power

    • U1 (AMS1117-3.3) 5 V to 3.3 V at 362 mA dissipates 0.62 W; SOT-223 handles about 1.0 W

    Cost estimate (JLCPCB, Economic PCBA, no shipping)

    BoardsPCBAssemblyPartsTotalPer board
    5$2.00$17.40$20.57$39.97$7.99
    10$5.00$17.80$41.14$63.94$6.39
    100$5.84$24.99$411.38$442.21$4.42

    Priciest part: the ESP32-C3 module at $3.31.

    Worth checking

    • USB D+/D- lengths differ by 17.7 mm (fine at USB full speed, worth tidying)
    • 92 mm of signal track on the bottom layer cuts the ground plane; 4 layers or moving routes to the top would help
    • Some parts still need LCSC numbers for assembly; kipcb lcsc -s finds in-stock candidates

    Next steps

    1. Open the project in KiCad and look it over.
    2. Upload the Gerber zip at jlcpcb.com, then the BOM and CPL for assembly, and check rotations in the preview.

    c3_sensor-gerbers.zip

    TSX · React component

    Generated

    Example file from a real run - the skill writes it into your workspace.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Viaduct designs printed circuit boards from a written description. Tell your agent what the board should do, and it produces a normal KiCad 9 project you can open, edit and send to a manufacturer.

    What it does

    • Asks before it designs: board size, power, connectors and their edges, how you'll build it, and anything noise-sensitive.
    • Uses real parts: verified building blocks (USB-C power and data, 3.3 V regulators, LiPo charging, ESP32-C3/S3, RP2040, ATmega328P, LEDs, buttons, sensors) and parts with live JLCPCB stock and prices.
    • Draws the schematic and lays out the board: every pin checked, connectors flush to their edges, decoupling capacitors at their pins, then autorouted with ground pours.
    • Picks 2, 4 or 6 layers by comparing your design with real routed boards, or uses the count you set. Four- and six-layer boards get solid ground and power planes.
    • Checks everything: ERC, DRC, electrical checks (logic levels, regulator heat, rail current) and noise checks.
    • Hands you files ready to order: Gerbers and drill files, a BOM and pick-and-place file in JLCPCB's format, a STEP 3D model for your enclosure, and a cost estimate for 5, 10 and 100 boards.

    Real timings

    From the latest test runs, description to manufacturing files: a USB-C ATtiny85 blinker in 17 seconds, an ESP32-C3 sensor node in about 21 seconds, a 44-part RP2040 board in about 6 minutes.

    Good to know

    The design work runs on your computer with KiCad 9 and Java 21+, on macOS or Windows. In Claude Code it installs as a plugin with four commands (/viaduct:design, /viaduct:review, /viaduct:inquiry, /viaduct:fab); other agents use it from the open-source repo. Autorouted boards work but aren't optimal, so review them before ordering. Fine-pitch chips like the RP2040 can leave a connection or two to finish by hand, and BGA, RF and high-speed layouts aren't supported.

    Free and open source (MIT): https://github.com/virajrungta/viaduct

    Website, docs and example boards: https://viaduct-pcb.github.io/

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Workflow Automation.

    Autorouted boards work but aren't optimal; review them before ordering. Fine-pitch chips like the RP2040 can leave a connection or two to finish by hand, and 4-layer routing for those chips isn't reliable yet. BGA packages, RF/antenna design, high-speed links (DDR, HDMI, PCIe) and mains voltage aren't supported. Needs KiCad 9 and Java installed locally.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 10 days ago

    • Free with an Agensi account

    Accounts
    GitHubJlcpcb
    Software
    KiCad 9Java 21+Git

    Permissions

    Terminal / Shell
    Read Files
    Write Files
    Network Access

    Allowed Hosts

    github.com
    jlcpcb.com
    kicad.org

    File Scopes

    hardware/**
    *.kicad_*

    Runs KiCad and the autorouter on your computer and writes the project and manufacturing files to the folder you choose (hardware/ by default). github.com: downloads Viaduct during setup. jlcpcb.com: looks up part stock and prices for the BOM and cost estimate. It never orders, uploads to a fab or handles payment.

    Listed10 days ago
    Updated9 days ago

    What's inside

    Frequently Asked Questions

    A normal KiCad 9 project (schematic and board) you can open and edit, plus manufacturing files: a Gerber and drill zip, a BOM and pick-and-place file in JLCPCB's format, a STEP 3D model for enclosure design, a cost estimate and a report of every check.

    KiCad 9, Java 21 or newer (for the autorouter) and Git, on macOS or Windows 10/11. In Claude Code it installs as a plugin with two commands; the getting-started guide covers the rest: https://virajrungta.github.io/viaduct/docs/getting-started.html

    Every board is checked before it's called ready: ERC, DRC, schematic-to-board match, electrical checks (logic levels, regulator heat, rail current) and noise checks. It uses real parts with stock numbers and follows each chip's standard circuit. It's still autorouted, so have someone look it over before ordering, especially for anything noise-sensitive.

    Yes. Claude Code gets the full plugin with slash commands. Other agents clone the open-source repo and use the same kipcb engine and workflow instructions; the skill walks the agent through setup.

    No. It prepares the files, estimates the cost and gives you an ordering checklist; you upload the files and pay on the manufacturer's site yourself.

    Viaduct searches the real-time LCSC catalog to ensure the parts used in your design are currently in stock and include accurate pricing for your Bill of Materials (BOM).

    New in Workflow Automation

    Free