Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    tsv process engineer

    1

    Expert TSV process engineering for 3D IC fabrication, Bosch process etching, and Cu metallization troubleshooting.

    $5

    /mo

    Subscription · cancel anytime

    Secure checkout via Stripe

    • Always the latest version
    • Delivered live to your agent via MCP
    • Cancel anytime, access ends at period end
    Security scanned
    tsv process engineer

    tsv process engineer

    Example session with this skill installed

    We are seeing significant voiding at the bottom of 10:1 aspect ratio TSVs after Cu electroplating. The via is 5um wide. What is the root cause and how do we fix the recipe?

    • Read your context and instructions
    • Compiled the tsv process engineer

    The observed voiding in 10:1 AR TSVs typically indicates a failure in either the PVD seed coverage or the ECD additive balance, preventing a true bottom-up fill.

    TSV Cu Fill Analysis

    SymptomProbable Root CauseRecommended Parameter Adjustment
    Bottom VoidsDiscontinuous PVD Cu seed at via baseIncrease PVD bias power; target >50nm thickness at bottom
    Bottom VoidsSuppressor/Accelerator imbalanceIncrease Accelerator concentration; reduce plating current density (J)
    Center SeamsPremature top pinch-offIncrease Suppressor concentration; check for Leveler depletion
    Cu ProtrusionThermal expansion mismatchAdd 250°C anneal step post-plating to stabilize Cu grain

    Recommended Action Plan

    Seed Layer Audit: Verify bottom-side seed coverage via FIB-SEM. If coverage is <20nm, increase PVD deposition time or optimize collimated sputtering parameters.
    2. ECD Recipe Tuning:

    • Initial Entry: Low current density (0.5 ASD) for 5 minutes to protect the seed.
    • Bulk Fill: Ramp to 1.5 - 2.0 ASD using a 3-additive system (VMS, Suppressor, Accelerator, Leveler).
    • Chemistry: Ensure Accelerator/Suppressor ratio is optimized for 10:1 AR to promote "superfilling."

    Metrology: Perform cross-sectional SEM on a coupon at the wafer center and edge to check for CD uniformity and fill consistency.

    Next steps

    • Verify PVD barrier/seed thickness at the via bottom using FIB-SEM.
    • Run a 3-factor DOE on Accelerator concentration (e.g., 5, 10, 15 mL/L).
    • Calibrate the plating tool's flow rate to ensure uniform additive delivery to the via mouth.
    $5/mo

    Subscription · always the latest version

    • Secure checkout via Stripe
    • Cancel anytime
    • Delivered live via MCP

    About this skill

    Scaling 3D IC and HBM production requires precise control over high-aspect-ratio features where minor deviations lead to total yield loss. This skill provides the deep domain expertise needed to stabilize TSV fabrication, from Bosch process tuning to backside via reveal.

    What it does

    • Process integration provides complete fabrication flows for silicon interposers and high-bandwidth memory (HBM).
    • Etch optimization delivers specific Bosch process parameters for SF6/C4F8 flow, power, and cycle timing to control scalloping.
    • Defect troubleshooting identifies root causes for Cu voids, seams, and protrusion using a structured matrix.
    • Metallization design configures bottom-up Cu electroplating recipes including additive ratios for suppressors and accelerators.
    • Metrology planning defines characterization strategies using SEM, FIB, and X-ray to verify via continuity.

    How it works

    1. Define the geometry by providing via diameter, depth, and target aspect ratio (AR).
    2. Select the process step such as DRIE, PECVD insulation, PVD barrier/seed, or Cu ECD fill.
    3. Analyze the defect by describing symptoms like leakage or high resistance for a root cause report.
    4. Generate the recipe to receive specific parameter ranges and SPC control plan recommendations.

    Frameworks & tools

    This skill is built for semiconductor process engineers working with DRIE systems, electroplating tools, and CMP platforms. It references SEMI standards, JEDEC reliability tests, and IEEE EPS roadmaps.

    Why this beats prompting it yourself

    Generic AI lacks the specific knowledge of Bosch cycle chemistry and Cu protrusion mechanics required for sub-micron TSV engineering. This skill applies a specialized troubleshooting matrix and strict KPI targets that standard models frequently hallucinate or generalize.

    Use cases

    • Stabilize high-aspect-ratio via etching to reduce sidewall roughness and footing.
    • Resolve voiding issues in 10:1 AR Cu electroplating flows.
    • Optimize CMP slurry selectivity to prevent dishing and Cu residue.
    • Design a backside reveal process that minimizes stress-induced Cu pumping.

    Known limitations

    Does not provide tool-specific G-code or proprietary vendor recipes for specific hardware models. Output is limited to industry-standard parameter ranges and best practices.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for APIs & Backend.

    Requires specific via dimensions (AR, diameter) for accurate recipes. Does not provide proprietary vendor-specific tool software commands.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 22 days ago

    Permissions

    No special permissions declared or detected

    Listed22 days ago

    What's inside

    Frequently Asked Questions

    The skill provides specialized technical guidance for 3D IC manufacturing, specifically solving complex issues like via scalloping, Cu voiding in high-aspect-ratio fills, and backside reveal stress management.

    This skill is a standardized logic module compatible with major LLM-based agents; it integrates via API or as a custom instruction set to enhance your existing AI's technical reasoning.

    No specialized coding is required; once added to your agent's workspace, you can immediately begin inputting via geometries or defect descriptions to receive engineering reports.

    Purchasing this skill gives you full access to the TSV troubleshooting matrices, recipe optimization logic, and a library of best practices for 3D IC integration.

    The skill is periodically updated to reflect the latest IEEE EPS roadmaps and advancements in HBM3/HBM3e production standards, ensuring your process flows remain current.

    While it provides universal parameter ranges and chemistry ratios (e.g., SF6/C4F8 balance), it does not generate proprietary, machine-executable code for specific vendor hardware.

    New in APIs & Backend