- Home
- Skills
- Game Development
- Tripology 3D - Create 3D models Easier than before.
More screenshots
Works with the AI Agents you already use
Tripology 3D - Create 3D models Easier than before.
Your agent builds every model from scratch: from an empty Blender scene to a finished, game-ready asset, as Python scripts run in headless Blender.
$19.99
Tripology 3D - Create 3D models Easier than before.
Example session with this skill installed
From an empty scene, build a small retro sci-fi probe as clean SubD in Blender: a hull, a nose dome, three fins, a nozzle, a side scoop, panel seams and a cable. Check every part's topology, then render it shaded and in wireframe.
- Read your context and instructions
- Compiled the tripology 3d
Summary
Built the probe as 11 all-quad SubD parts with subdkit and ran each through the topology gate. All 11 pass: 100% quads, no triangles, no n-gons, no sharp edges. Four renders were written (two shaded, two wireframe). Total run time in headless Blender 5.2: about 8 seconds.
Command
blender -b --factory-startup --python scripts/example_subd_probe.py -- OUT_DIR
Topology gate results
| Part | Faces | Quads | Poles | Sharp edges | Result |
|---|---|---|---|---|---|
| hull | 8,064 | 100% | 0.42% | 0 | PASS |
| dome | 4,736 | 100% | 0.72% | 0 | PASS |
| seam_ring | 2,048 | 100% | 0% | 0 | PASS |
| nozzle | 16,512 | 100% | 0.21% | 0 | PASS |
| fin0 / fin1 / fin2 | 2,032 each | 100% | 0.39% | 0 | PASS |
| scoop_frame | 2,304 | 100% | 0% | 0 | PASS |
| seam_v | 4,320 | 100% | 0.60% | 0 | PASS |
| seam_waist | 9,504 | 100% | 0.27% | 0 | PASS |
| cable | 3,264 | 100% | 0.55% | 0 | PASS |
How it was built
Hull, nose dome and nozzle: lathed profiles with holding loops at every crease, so the edges stay crisp under subdivision without sharp marks or bevel modifiers. The nozzle has five ribs.
- Fins: three swept cages sunk slightly into the hull rather than welded to it, which keeps both surfaces clean.
- Scoop frame: a rounded profile swept round a rounded triangle and set into the side of the hull.
Seams: a ring at the dome joint plus two trim strips laid on the hull (one vertical, one round the waist), so panel lines read without cutting the hull's topology.
- Cable: a tube swept along a curve from the seam ring down to the nozzle.
Files
probe_a.png,probe_b.png: shaded viewsprobe_wire.png,probe_wire_close.png: wireframe views showing the even quad flow
Next steps
- Approve the shape from the renders (the shape gate), or ask for changes: the script is edited and re-run.
- Add detail: bolts and inserts from the kit library, decals and print as texture.
- Make it game-ready with
scripts/export/gameready.py: LOW mesh, UV unwrap, bake, LODs and FBX.
Connects securely to your tools. The creator never sees your data.
About this skill
Your agent builds every model from scratch: from an empty Blender scene to a finished, game-ready asset, as Python scripts run in headless Blender. No asset packs, no downloaded meshes, no AI-generated geometry, no photoscans. Every fix is an edit and a re-run, so your models stay yours, repeatable and easy to change.
Built from scratch, every time
- You start with an empty scene. Bodies, panels, vents, wheels, stitching, laces and every bolt are generated by code at real size. Even the ISO/DIN fasteners are built from the standards' dimensions, and no script ever connects to the internet.
- Your reference stays a reference. A photo or concept sheet is traced to real-size outlines and used to score the shape, never to supply geometry.
- Original designs you own. Nothing comes from someone else's model, so every asset is your own work for your game or your portfolio.
What it covers
| Guide | What your agent can build |
|---|---|
| Props | Monitors, radios, keypads, control panels, lockers, lamps, machinery, knives, guns, tools, invented sci-fi props and kit pieces; replicas of a real object from a reference picture |
| Cars | Original cars, trucks, vans, buggies and karts: lofted quad bodies, real panel gaps, inset glass, recessed lamps, wheels, a steer/roll/door rig and a skeletal vehicle FBX |
| Helmets | Hockey, goalie, bike, ski, motorcycle, football, military and climbing helmets and masks: a fitted base dome, moulded panels, vents, cages, straps and hardware |
| Shoes | Sneakers, boots, ice and roller skates, cleats: a last plus one panel per pattern piece, real leather thicknesses, stitching, laces, eyelets and soles |
| Kit library | Kitbashing with real-size parts: 139 ISO/DIN bolts, nuts, washers, rivets, studs and standoffs, generated from the standards' dimension tables |
| House style | One consistent look (scale and naming, bevel ladder, shading, SubD, modifier stacks, UVs and texel density, export) and an automatic style check on any .blend |
| 3D printing | Any finished model turned into one watertight solid for printing: open shells thickened to a real wall, labels raised, everything merged, then checked for open edges, loose pieces and thin walls. STL and 3MF in millimetres, with a preview and a report |
How it works
- Structure before detail. The agent writes down the parts, traces the reference to real-size outlines and scores every pass against the picture before adding detail.
- Shape gate. It stops after the shape phase, shows side, top and 3/4 views next to your concept, and waits for your OK before the long production work.
- Built, not sculpted. All-quad SubD cages with holding loops (checked by a topology gate), live bevel, boolean and solidify stacks, moulded panels, and real kit parts. No blobby remesh or voxel surfaces.
- Game-ready export. A bundled chain makes the LOW mesh, an origami-style UV unwrap with no stretched islands, a Cycles high-to-low bake (base colour, normal, ORM), LODs, FBX for Unreal or any engine, review renders and a web GLB.
- Print-ready export. One command scales a finished model (say 150 mm long), merges it into a single watertight solid and checks it before you print. Tested on a 724-part field radio, a car, a kitbashed cabinet and a moulded helmet: all came out watertight.
- Learn from any .blend. A stack audit reads how another file was built, so the agent takes techniques and ratios, never meshes.
What's inside
A short SKILL.md that sends each job to the right guide, guides for all six areas in references/, and 38 documented scripts in scripts/. Working examples build a SubD probe, a complete rigged car and a kitbashed control cabinet from nothing, so you can check your setup in minutes.
Requirements
Blender 5.2, run headless (blender -b --factory-startup --python ...). The tracing tools and the helmet layout engine need Python 3 with numpy, scipy and Pillow. A GPU makes bakes faster but is not required. No internet connection is needed: nothing is ever downloaded.
Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Game Development.
Built and tested on Blender 5.2 only; other versions may need small API fixes. The car's skeletal vehicle FBX has not been tested inside Unreal yet. Not for characters or organic sculpting. 3D printing: when parts do not merge cleanly the export uses a 0.1 mm voxel merge, which softens edges by about that much; a model with hundreds of parts takes a few minutes; parts that do not touch the body (a car's wheels without axles) are reported as separate pieces to print on their own.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before buying a skill.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Money-back guarantee
Doesn't do what its page promises? You get your money back.
Trust & safety
Security scan
Security scan passed 7 days ago
- Software
PythonBlender 5.2numpy, scipy and Pillow (pip)
- Optional
- CUDAorOptiX GPU (faster bakes)Unreal Engine 5orany FBX engine
Run every script with Blender's -b (background) flag. The tracing tools also need: pip install -r requirements.txt (numpy, scipy, Pillow).
Permissions
Terminal/Shell: your agent runs each script itself with Blender in background mode (blender -b ... --python script.py) or with Python; no script starts other programs. Read/Write files: scripts read the .blend files and reference images you pass, and write only the output paths you pass plus the two part libraries the setup builds. Environment variables: five optional settings with defaults, listed in SKILL.md (BLENDER_INSERT_LIB, KITSURFACE_ROOT, HELMET_KIT, BEAUTY_RES, HELMET_SAMPLES); nothing else is read. No network access: nothing is downloaded and no script connects to the internet. The print export's 3MF writer contains the 3MF format's XML namespace names (schemas.microsoft.com, schemas.openxmlformats.org), which every .3mf file must carry; they are identifiers, not network addresses, and nothing is fetched.