- Home
- Skills
- APIs & Backend
- solidcraft robust build order
Works with the AI Agents you already use
solidcraft robust build order
A robust SolidCraft modeling workflow to prevent boolean failures, kernel hangs, and volume calculation errors.
Free
solidcraft robust build order
Example session with this skill installed
Generate a robust build order for a prismatic base block with 12 corner edges (15mm thick) and R4 fillets on 3 edges. Include volume verification logic.
- Read your context and instructions
- Compiled the solidcraft robust build
Modeling a simple prismatic body requires early filleting to ensure volume accuracy and kernel stability. I will sequence the base extrusion, apply the fillets in a single batch, and verify the resulting volume against the analytic corner correction formula.
SolidCraft Prismatic Build Order
# 1. Base Body Construction
# Extrude base profile symmetrically to establish symmetry planes
batch = [
solid.extrude(sketch="Profile_1", distance=15, symmetric=True, operation="new")
]
run_batch(batch)
# 2. Prismatic Fillet Regime (3a)
# Group R4 fillets into one call after simple base features
# Pick points at mid-thickness (z=0) for edge identification
checkpoint("pre_fillet")
fillet_edges = [
point(20, 10, 0),
point(-20, 10, 0),
point(0, -15, 0)
]
solid.fillet(edges=fillet_edges, radius=4)
# 3. Verification Logic
# Calculate volume with corner correction: area change = +/- r^2 (tan(d/2) - d/2)
# For R4 on three 90-degree convex corners:
# d = 180 - 90 = 90 degrees (pi/2 radians)
# correction = - (4^2) * (tan(pi/4) - pi/4) * thickness
# correction = -16 * (1 - 0.7854) * 15 = -51.504 mm^3
stats = inspect_design(measure=True)
print(f"Measured Volume: {stats.volume}")
Next steps
- Run
measureto confirm the center of mass lies exactly on the symmetry plane. - Apply chamfers to hole edges in a separate batch to avoid kernel interference.
- Use
saveto create a permanent checkpoint before adding complex top-level features.
Connects securely to your tools. The creator never sees your data.
About this skill
CAD modeling in SolidCraft often leads to silent boolean failures, kernel hangs, and incorrect volume calculations. Simple errors, like coincident tool faces or incorrect fillet sequencing, can shift the center of mass or cause 60-second device timeouts that roll back entire feature batches. This skill provides a hardened workflow for constructing parts with verifiable accuracy.
What it does
- Optimized Build Sequencing executes base profiles, intersections, and bores in a specific order to prevent center-of-mass shifts.
- Boolean Failure Prevention enforces safety offsets for tool faces and radii to avoid "no result" errors and application hangs.
- Dual-Regime Filleting applies distinct logic for prismatic versus complex geometries to prevent 20-minute kernel timeouts.
- Geometric Verification uses analytic formulas and Python-based numeric integration to validate volume and mass properties.
- Parametric Generation creates Python scripts to automate design-table configurations based on drawing formulas.
How it works
- Analyze Drawing to identify the part regime as either simple prismatic or complex (lofts, sweeps, drafts).
- Execute Base Geometry using symmetric extrusions followed by early intersections before any hole or bore cuts.
- Apply Fillet Strategy by grouping radii for simple parts or using
fit:"reduce"and single-call batches for complex bodies. - Verify Design via
measurecalls compared against corner correction formulas and numeric integration.
Frameworks & tools
SolidCraft CAD kernel, Python for numeric integration and parametric command generation, and standard CAD operations (Boolean, Fillet, Chamfer, Shell).
Why this beats prompting it yourself
Generic prompts often ignore the specific kernel quirks of SolidCraft, leading to silent geometry corruption. This skill implements specific safety offsets and fillet grouping logic that prevents the kernel from hanging or returning incorrect volumes.
Use cases
- Modeling high-precision mechanical arms with tapered or pocketed features.
- Generating parametric design tables where dimensions like length or wall thickness change.
- Recovering from CAD kernel timeouts and "Boolean Cut: no result" errors.
- Validating the physical accuracy of a model against analytic volume estimates.
Known limitations
Does not support solid.draft, solid.shell, or solid.mirror workflows yet. Fillets on knife-edge lips or narrow ends may still fail if the radius exceeds neighboring face dimensions.
Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for APIs & Backend.
Workflow for draft and shell operations is untested. Fillet radii exceeding neighboring face dimensions may be automatically reduced or fail.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before buying a skill.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Free to use
No account required to browse
Trust & safety
Security scan
Security scan passed 19 days ago
- Free with an Agensi account
Permissions
No special permissions declared or detected