- Home
- Skills
- Agents & Orchestration
- solidcraft mechanisms
Works with the AI Agents you already use
solidcraft mechanisms
Build, constrain, and animate complex SolidCraft CAD assemblies with precise joint control and interference detection.
Free
solidcraft mechanisms
Example session with this skill installed
I need to add a 2:1 gear link between Gear1:1 and Gear2:1. Gear1 is the driver. Then run a quick motion study for 360 degrees to check for interference.
- Read your context and instructions
- Compiled the solidcraft mechanisms
I have established the motion link between the gears and configured a motion study to check for collisions during a full rotation.
Gear Mechanism and Interference Analysis
| Action | Result | Details |
|---|---|---|
| Motion Link | Created | joint.motion_link set between Gear1 and Gear2 with ratio 0.5 |
| Motion Study | Defined | motion.study "Gear_Test" created with 24 steps |
| Collision Check | Completed | motion.interference run for Gear1:1 and Gear2:1 |
| Status | Clear | No interference detected through 360 degrees of rotation |
// Motion Link Configuration
{
"a": "Gear1_Joint",
"b": "Gear2_Joint",
"ratio": 0.5,
"offset": 0
}
Next steps
- Call
motion.play {"study": "Gear_Test", "step": 12}to inspect the assembly at the 180-degree mark. - Use
motion.export_animationto generate a GIF of the gear mesh for documentation. - If you change the gear teeth count, update the
ratioparameter to match the new pitch diameters.
Connects securely to your tools. The creator never sees your data.
About this skill
Developing complex assemblies often fails when joints are misaligned, closed loops conflict, or motion links produce unexpected results. This skill provides precise control over the SolidCraft CAD engine to build and animate mechanisms without trial-and-error. It treats assemblies as geometric problems, requiring world coordinates and axis definitions to ensure parts move exactly as intended.
What it does
- Joint Management creates revolute, slider, and cylindrical joints using world coordinates and handles as-built joints for pre-positioned parts.
- Motion Linkage establishes ratios between joints for gears, racks, pinions, and screws, including mirrored motion and complex chains.
- Closed-Loop Solving handles actuators on hinged panels and four-bar linkages by calculating degrees of freedom and identifying constraint conflicts.
- Kinematic Analysis runs motion studies, exports coupler curve traces, and generates animated GIFs of assembly movements.
- Interference Detection identifies collisions between specific components and calculates exact stopping points for contact sets.
How it works
- Inspection use
joint.listto identify grounded occurrences, degrees of freedom, and floating chains that lack a path to the root. - Construction define components, ground the base frame, and batch create joints with specific world points and axes to prevent 180-degree flips.
- Simulation key the driving joint in a motion study or use
joint.sweepto find the maximum range of motion before collision. - Validation read back joint values and occurrence properties to compare calculated poses against the CAD engine's state.
Frameworks & tools
Built for SolidCraft versions 0.11.1 and higher via its dedicated MCP server. It manages assembly data structures, URDF tree exports, and kinematic solvers.
Why this beats prompting it yourself
Generic prompts often fail to account for the right-hand rule in joint axes or the specific way closed loops stop motion. This skill enforces a coordinate-first workflow that prevents "jumping" parts and identifies why a drive command reports success even when no movement occurs.
Use cases
- Actuator Linkages modeling the stroke and hinge relationship for hydraulic or mechanical lids.
- Transmission Design syncing gear ratios and rack-and-pinion movement for linear motion.
- Collision Audits finding the exact angle a door hits a frame or a robotic arm enters a self-collision state.
- Path Tracing visualizing the coupler curve of a four-bar linkage and saving it as a 3D sketch.
Known limitations
URDF exports omit joints that close loops due to tree-structure constraints. Large assemblies require specific occurrence listing to avoid excessive JSON payloads.
Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.
URDF exports exclude joints that close loops. Large assemblies require targeted occurrence checks to avoid 140KB+ payload overhead. Drives on ungrounded chains will fail to move parts.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before buying a skill.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Free to use
No account required to browse
Trust & safety
Security scan
Security scan passed 19 days ago
- Free with an Agensi account