Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    solidcraft 3d print DfM

    1

    DFM checklist for SolidCraft models to ensure successful FDM 3D printing on desktop machines.

    Free

    Security scanned
    solidcraft 3d print DfM

    solidcraft 3d print DfM

    Example session with this skill installed

    Review my SolidCraft design for a print-in-place box hinge. The wall thickness is 1.2mm and I'm using a 0.4mm nozzle. Check the clearances and overhangs for a Bambu A1 mini.

    • Read your context and instructions
    • Compiled the solidcraft 3d print

    I have reviewed the hinge design against FDM DFM standards. The 1.2mm wall thickness is ideal as it is a multiple of the 0.4mm nozzle width. I have flagged the bore orientation and gap tolerances for the print-in-place mechanism.

    DFM Review: Print-in-Place Hinge

    FeatureRequirementCurrent StatusRecommendation
    Wall Thickness>= 0.8 mm (multiples of 0.4)1.2 mmPass. Provides 3 clean perimeters.
    Hinge Clearance0.4 mm radial/axial gapNot specifiedSet radial gap to 0.4 mm; ensure bodies do not touch.
    Overhangs<= 45 degrees90 deg at top of boreApply 45 deg chamfer or teardrop to bore top.
    Bore AxisHorizontal orientationVerticalRotate model so pin/bore axis is horizontal.
    Print Bed< 170 mm (A1 mini)Within limitsEnsure flat base has 0.5 mm chamfer for elephant foot.

    Slicer Hand-over Notes

    • Profile: 0.16 mm or 0.20 mm layer height. Do not use 0.28 mm "Extra Draft".
    • Supports: Set to OFF to avoid filling the internal hinge gaps.
    • Walls: Use 3-4 walls for structural integrity of the hinge plates.
    • Assembly: Load 3MF as a single object with multiple parts in Bambu Studio.

    Next steps

    1. Apply a teardrop profile to the horizontal hinge bore to eliminate the 90-degree bridge.
    2. Use the measure tool in SolidCraft to verify the 0.4 mm gap between the pin and the bore.
    3. Export the folder with the .3mf file and this review as a text note for the slicer operator.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    FDM 3D printing often fails because CAD models ignore physical printer constraints. This skill applies strict Design for Manufacturing (DFM) rules to SolidCraft designs to ensure they print successfully on desktop FDM machines like the Bambu Lab A1 mini.

    What it does

    • Geometry validation enforces minimum wall thicknesses, overhang limits, and nozzle-specific feature sizes.
    • Clearance management defines exact gaps for mating parts and print-in-place hinges to prevent fused components.
    • Orientation optimization suggests modeling poses that align with Z-axis strength and minimize support requirements.
    • SolidCraft build checks identifies potential boolean kernel hangs and vertex order issues during the modeling process.
    • Export preparation generates standard hand-over notes including slicer settings and assembly instructions for Bambu Studio.

    How it works

    1. Analyze geometry against the 0.4 mm nozzle constraints and 180 mm bed volume.
    2. Review clearances for sliding parts or integrated hinges using specific radial and axial gap values.
    3. Verify overhangs and suggest teardrop profiles or chamfers for unsupported spans.
    4. Format export instructions for 3MF/STL files including specific slicer profile recommendations.

    Frameworks & tools

    SolidCraft CAD, Bambu Studio, FDM 3D printers (optimized for 0.4 mm nozzles and A1 mini bed dimensions).

    Why this beats prompting it yourself

    Generic prompts often miss specific hardware limitations like elephant foot compensation or specific boolean kernel bugs in SolidCraft. This skill uses verified gap tolerances and specific geometric workarounds that prevent common print failures and CAD crashes.

    Use cases

    • Designing functional mechanical assemblies with sliding parts.
    • Creating print-in-place hinges that do not fuse during the build.
    • Optimizing parts for support-free printing to reduce post-processing.
    • Auditing SolidCraft files for boolean stability before final export.

    Known limitations

    Constraints are optimized for 0.4 mm nozzles. Some clearance values for horizontal holes and print-in-place hinges are marked as unverified working values.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.

    Optimized for 0.4 mm nozzles and 180 mm beds. Clearance values for hinges and horizontal holes are currently unverified working estimates.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 19 days ago

    • Free with an Agensi account

    Permissions

    No special permissions declared or detected

    Listed19 days ago

    What's inside

    Frequently Asked Questions

    This skill analyzes SolidCraft models specifically for FDM printing constraints, identifying issues like thin walls or impossible overhangs that often cause prints to fail on machines like the Bambu Lab A1 mini.

    It is specifically optimized for SolidCraft CAD and desktop FDM printers using a 0.4mm nozzle, including pre-set clearance values for print-in-place hinges and sliding assemblies.

    The skill provides specific gap tolerances (radial and axial) and orientation suggestions to ensure moving parts remain functional and do not fuse together during the printing process.

    You will receive the SolidCraft DFM logic package, including the geometry validation engine, clearance management profiles, and export preparation templates for Bambu Studio.

    Yes, it includes a specific 'SolidCraft Build Check' designed to identify and resolve common boolean kernel hangs and vertex order issues before they cause CAD crashes or export errors.

    The current version is optimized for a 0.4mm nozzle; however, buyers receive access to version updates that may include support for different nozzle sizes and updated clearance profiles.

    New in Agents & Orchestration

    Free