- Home
- Skills
- Agents & Orchestration
- SO-101 Robot Arm Operator
Works with the AI Agents you already use
SO-101 Robot Arm Operator
Control SO-101 robot arms safely via MCP with state verification and joint limit enforcement.
Free
SO-101 Robot Arm Operator
Example session with this skill installed
Check the arm state, then move the shoulder_pan left by 5 degrees if the area is clear.
- Read your context and instructions
- Compiled the so-101 robot arm
I have checked the current state of the SO-101 arm. The workspace is confirmed clear.
Robot Operation Log
| Action | Joint | Value | Status |
|---|---|---|---|
get_robot_state | All | N/A | Success |
| Current Position | shoulder_pan | 0.0° | Verified |
| Command | move_joint_by | -5.0° | Executed |
| Final Position | shoulder_pan | -5.1° | Success |
Movement Details
The shoulder_pan was moved from 0.0 degrees to -5.1 degrees. The slight difference of 0.1 degrees is within normal motor tolerance. All other joints (shoulder_lift, elbow_flex, wrist_flex, wrist_roll, gripper) remained stationary.
Next steps
- Run
get_robot_stateagain to ensure no drift occurred. - If the direction was correct, we can proceed with a larger movement.
- Use
list_safe_posesif you want to return the arm to a stowed position.
Connects securely to your tools. The creator never sees your data.
About this skill
Robotic hardware control requires extreme caution. This skill provides the safety protocols and logic required to operate the SO-101 and SO-ARM101 robot arms via the so101-mcp server. It prevents hardware damage by enforcing state checks and human-in-the-loop confirmation.
What it does
- State monitoring calls
get_robot_stateto retrieve precise joint angles before any movement. - Incremental motion utilizes
move_joint_bywith small deltas to verify motor direction and calibration safely. - Coordinate management handles absolute and relative movement for all six joints including the gripper.
- Safety enforcement rejects any command that violates joint limits or lacks necessary calibration.
- Pose execution manages transitions to pre-configured safe poses stored in the server.
How it works
- Initialize by reading the current robot state and verifying joint positions.
- Validate user requests against joint limits and ask for physical clearance confirmation.
- Execute movements using one-step-at-a-time commands followed by immediate state verification.
- Report final positions and handle serial port or motor tolerance errors gracefully.
Frameworks & tools
Specifically designed for the SO-101 / SO-ARM101 robot arm. It requires the so101-mcp server and the lerobot-calibrate utility for initial hardware setup.
Why this beats prompting it yourself
Directly prompting hardware movement often ignores mechanical limits or fails to verify state, leading to collisions. This skill embeds a safety-first "check, move, verify" loop that handles serial port conflicts and motor tolerances that generic prompts miss.
Use cases
- Move the arm to a specific
elbow_flexangle for precision tasks. - Verify if the robot is currently in a "home" or "stow" pose.
- Cycle the gripper to test motor response or pick up light objects.
- Safely probe joint limits during initial setup.
Known limitations
Does not support collision detection or interrupts once a move starts. Only supports joint angles, not Cartesian (cm) coordinates.
Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.
No collision detection or motion interrupts. Motion is limited to joint angles (degrees), not XYZ coordinates. Requires prior calibration via lerobot-calibrate.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before buying a skill.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Free to use
No account required to browse
Trust & safety
Security scan
Security scan passed 20 days ago
- Free with an Agensi account
- Software
- So101 MCP