More screenshots

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    siglent sds800xhd

    1

    Interfacing with lab hardware usually requires proprietary drivers or bloated software suites.

    $5

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned
    siglent sds800xhd

    siglent sds800xhd

    Example session with this skill installed

    Connect to the scope at 192.168.1.55. Check the status of channel 1, set the trigger to 2.5V rising edge, and take a screenshot of the current signal.

    • Read your context and instructions
    • Compiled the siglent sds800xhd
    • Generated the data export

    I have connected to the Siglent SDS814X HD at 192.168.1.55. Channel 1 is active, and I have updated the trigger settings and captured the display.

    Scope Status and Capture

    ParameterValue
    ModelSDS814X HD
    SerialSDS8HDX6R2041
    C1 Scale500 mV/div
    C1 Offset0.00 V
    TriggerC1, Edge, Rising, 2.50 V
    Timebase1.00 ms/div
    Screenshotsds_cap_20231027_1420.png
    
    # Configuration used for this capture
    python scripts/sds.py --host 192.168.1.55 channel C1 --on on --scale 0.5
    python scripts/sds.py --host 192.168.1.55 acq run --trig-source C1 --trig-level 2.5 --trig-slope RISing
    python scripts/sds.py --host 192.168.1.55 screenshot sds_cap_20231027_1420.png
    

    Next steps

    • Download sds_cap_20231027_1420.png to inspect the waveform visually.
    • Run measure C1 FREQ PKPK to get precise hardware timing and amplitude data.
    • Use waveform C1 --csv data.csv if you need to perform FFT or offline analysis on the raw samples.

    sds_cap_20231027_1420.png

    CSV · data export

    Generated

    Example file from a real run - the skill writes it into your workspace.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Interfacing with lab hardware usually requires proprietary drivers or bloated software suites. This skill provides direct network control of Siglent SDS800X HD series oscilloscopes using a lightweight SCPI implementation. It eliminates the need for VISA libraries or vendor-specific desktop tools by communicating over standard TCP sockets.

    What it does

    • Hardware Control manages vertical scales, timebase, trigger settings, and channel coupling.
    • Automated Measurement retrieves up to 12 simultaneous hardware parameters like frequency, RMS, and rise time.
    • Data Export captures high-resolution waveform data to CSV for external analysis in Python or Excel.
    • Visual Verification generates PNG screenshots of the instrument display for remote monitoring.
    • Statistical Analysis tracks min, max, and standard deviation over multiple acquisitions.

    How it works

    1. Connect to the scope using the instrument's IP address on port 5025.
    2. Initialize by querying the device ID and current channel status to verify the signal path.
    3. Configure the vertical and horizontal acquisition settings to frame the signal correctly.
    4. Execute measurements or data captures using specific commands for waveforms, screenshots, or hardware stats.

    Frameworks & tools

    The system uses a standalone Python script compatible with version 3.8 and higher. It communicates via the SCPI (Standard Commands for Programmable Instruments) protocol over raw TCP/IP.

    Why this beats prompting it yourself

    Writing reliable SCPI scripts requires handling complex timing, binary data formats, and specific instrument command dialects. This skill includes a pre-built driver that abstracts these complexities into simple JSON-returning commands, ensuring you do not have to manually parse raw socket responses or handle instrument-specific error codes.

    Use cases

    • Automated Bench Testing for characterizing power supply ripple or clock jitter.
    • Remote Debugging of hardware when the engineer is not physically at the lab bench.
    • Documentation Pipelines that automatically attach scope screenshots to Jira or GitHub issues.
    • Long-term Stability Testing by logging hardware statistics over hours of operation.

    Known limitations

    Requires a Siglent SDS800X HD series scope with LAN access. It does not support older SDS1000 series command sets or USB-only connections.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse All Claude Skills.

    Requires Siglent SDS800X HD series hardware with LAN enabled. Supports only TCP port 5025. Does not support legacy SDS1000-style commands or USB connectivity.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 13 days ago

    Software
    Python

    Permissions

    Terminal / Shell
    Read Files
    Write Files
    Network Access
    Environment Variables
    Listed13 days ago

    What's inside

    Frequently Asked Questions

    This skill enables direct control of Siglent SDS800X HD oscilloscopes over a network using a lightweight SCPI driver, removing the need for heavy VISA libraries or proprietary vendor software.

    No, this skill is purpose-built for the high-definition SDS800X HD series; it is not compatible with older SDS1000 models or devices that only support USB connectivity.

    You will receive the complete Python-based integration script and a guide for connecting your AI agent to the instrument via TCP/IP on port 5025.

    Setup is simple: ensure your oscilloscope is on the same local network as your agent, provide the device's IP address, and the skill handles the socket communication and command parsing.

    The skill returns measurements, hardware statistics, and waveform data in clean, structured JSON formats, making it easy to pipe results into other analysis tools or databases.