Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    PCB Crafting & Manufacturing Checks

    1

    Design and review KiCad boards, catch footprint and assembly export errors, and check Gerber, drill, and mechanical handoff files before fabrication.

    $10

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned
    PCB Crafting & Manufacturing Checks

    PCB Crafting & Manufacturing Checks

    Example session with this skill installed

    For Rev D3, compare placement-a.csv and placement-b.csv with my BOM and KiCad XML netlist. I also need the bare board to fit a slot with a minimum clear height of 1.75 mm. The finished board thickness is 1.60 ± 0.10 mm. Which placement file matches, what is the worst-case thickness margin, and is the revision ready to send to the fabricator?

    • Read your context and instructions
    • Compiled the pcb crafting
    • Generated the UI component

    Use placement-b.csv. It matches the BOM and KiCad XML netlist in the checked fields. placement-a.csv is missing

    C7 and includes

    C8, which is absent from the intended assembly.

    Worst-case thickness margin is 0.05 mm total. The thickest allowed board is

    1.70 mm. Subtracting that from the

    1.75 mm minimum slot gives

    0.05 mm before any additional clearance requirement. Physical fit remains unverified.

    Release status: NO_RELEASE

    For Rev D3, complete the native design checks and get the fabricator to review the exact manufacturing files before ordering samples. On the first bare boards, measure the thickness along the insertion path, check for bow or edge burrs, and test insertion through the minimum slot without forcing the board.

    placement-b.csv

    TSX · React component

    Generated

    Example file from a real run - the skill writes it into your workspace.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Use this skill to plan a PCB layout, review a board revision, or check the files you are sending to fabrication and assembly. Give the agent the board constraints, the intended component population, and the fabricator's limits. It reports what passed, where it found a mismatch, and what evidence the build still needs.

    • Plan layout and routing. Set board and connector constraints, choose a stackup, and review return paths, switching loops, and layout tradeoffs. Use KiCad for native design changes and rule checks.
    • Review footprints and board geometry. Compare supported KiCad courtyards and vias with the design requirements. Verify pad numbers, center positions, and sides against a known-good footprint, including mirrored bottom-side footprints.
    • Check assembly exports. Compare the bill of materials, component placement file, and KiCad XML netlist. Identify missing, extra, or mismatched components before handing the files to an assembler.
    • Screen manufacturing outputs. Check supported Gerber and Excellon features for annular rings, plated slots, and paste near vias. Compare against the limits for the intended process.
    • Verify the mechanical handoff. Check that the KiCad and STEP files match the same export record. Calculate board-to-slot clearance from finished-board tolerances and the smallest available opening.

    The six bundled Python checks read the supplied files and report the scope of each finding. KiCad, a CAM viewer, and a CAD engine extend the workflow with native rule checks, manufacturing image review, and solid geometry checks. Fabricator review and physical or electrical tests provide separate evidence for release.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Testing & Debugging.

    The scripts cover supported formats and geometry, independent of the native KiCad and CAM checks. Unsupported constructs and missing inputs can leave checks incomplete. Static file checks and calculated clearances do not verify supplier approval, real-world fit, electrical performance, or readiness to manufacture.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed today

    Software
    Python 3+Read-access
    Optional
    KiCadA CAM viewerA CAD engine

    The bundled Python checks read inputs and print reports. They do not modify the project, use the network, or place fabrication orders. Native KiCad or CAD workflows can create new project files or exports when requested.

    Permissions

    Terminal / Shell
    Read Files
    Write Files
    Listedtoday

    What's inside

    Frequently Asked Questions

    The six bundled checks run with Python 3 on the supplied files. Use KiCad to edit a design, run native design rule or electrical rule checks, or create new exports.

    It checks pad numbers, center positions, and sides against a known-good footprint. Compare pad geometry and the intended pinout with the manufacturer's land pattern as part of the footprint review.

    It reports a release status for the selected revision and build scope. That status uses the evidence you supply, such as native design checks and the fabricator's review of the exact outputs. A thickness calculation or a matching placement file covers only that check.

    Yes. The PCB skill checks the board, export record, and board-thickness budget. A CAD workflow can use the matching STEP file to inspect enclosure clearances and the assembly path.

    New in Testing & Debugging