Insurance Claim Estimator (Korea)

    1

    Korean hospital receipts mix national-insurance covered (급여) and non-covered (비급여) charges, KCD diagnosis codes and a stack of fixed-benefit riders (골절진단비, 수술비, 입원일당 ...).

    Free

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    Insurance Claim Estimator (Korea)

    Example session with this skill installed

    팔 골절로 응급실 가서 통깁스했어. 영수증이랑 진단서 올릴게, 내 보험에서 얼마 나올지 계산해줘. (I broke my arm, went to the ER and got a full cast. Here are the receipt and diagnosis - how much can I claim?)

    • Read your context and instructions
    • Compiled the insurance claim estimator

    요약 (Summary)

    영수증의 KCD 코드 S52.5(요골 원위부 골절), 통원·병원급, 응급실 내원, 석고붕대 처치를 읽어 evaluate_claim으로 계산했습니다. 증권으로 확인된 특약 2개가 해당되어

    예상 합계 320,000원입니다.

    특약별 결과 (Per-rider result)

    보험 / 특약상태예상 금액근거
    예시손해보험 / 골절진단비ELIGIBLE300,000원KCD 'S52.5'가 증권의 골절 보장 분류(S42·S52·S62·S72·S82)에 해당
    예시손해보험 / 응급실내원비ELIGIBLE20,000원응급실 내원 진료 확인
    예시손해보험 / 깁스치료비NOT_EVALUATED0원이 특약의 지급 요건이 증권으로 확인되지 않아 계산하지 않음
    예시생명 / 실손의료보험(통원)NOT_EVALUATED0원4세대 실손 규칙의 약관 검증이 끝나지 않아 계산하지 않음

    총 예상 지급액: 320,000원 (참고용 예상치)

    보험사에 낼 서류 (Documents to submit)

    • 진료비 계산서·영수증 (병원 원무과 발급)
    • 진료비 세부내역서 (급여/비급여 분리)
    • 방사선(X-ray) 판독결과지 또는 골절 진단서 (KCD 코드 기재)
    • 응급실 진료기록 (내원 경위 및 응급 여부 기재)

    다음 단계 (Next steps)

    • 깁스치료비를 계산하려면 증권이나 약관에서 이 특약의 지급 요건(예: 석고붕대만 보장, 부목 제외)을 확인해 알려 주세요. 확인되면 다시 계산합니다.
    • 실손은 보험사 앱에서 청구하면 심사 후 지급액이 정해집니다.

    본 결과는 참고 정보이며 보험금 지급을 확정하지 않습니다. 약관 원문으로 검증되지 않은 규칙이나 확인되지 않은 진료 사실은 계산하지 않았습니다.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Korean hospital receipts mix national-insurance covered (급여) and non-covered (비급여) charges, KCD diagnosis codes and a stack of fixed-benefit riders (골절진단비, 수술비, 입원일당 ...). Working out what you can actually claim is tedious, and an LLM doing the arithmetic itself will happily invent numbers.

    This skill splits the job: your agent reads policy certificates and receipts and talks to the user in Korean, while the open-source insurance-claim-mcp server (MIT, runs locally via uvx) does every calculation in a deterministic rule engine.

    What it does

    • Registers the user's policies and riders from a policy certificate (보험증권) photo, after the user confirms the extracted values.
    • Maps riders to standard rules (fracture, cast, surgery, burn, suture, flu antiviral, inpatient daily, ER visit) and asks follow-up questions for anything it can't map.
    • Estimates a claim from receipts, prescriptions or medicine bags: KCD code, covered/non-covered amounts, hospital tier, procedures, drugs.
    • Lists the documents the insurer will ask for, and how to request a missing certificate through official insurer channels only.

    Fail-closed by design

    • Only riders backed by a policy certificate are calculated. Anything from memory or third-party summaries is never calculated.
    • Rules not yet checked against policy wording return NOT_EVALUATED (0) with the reason, never an estimate.
    • Results are informational estimates, not payout decisions.

    Privacy

    Data stays on the user's machine (SQLite in ~/.insurance-claim-mcp/). The skill never asks for resident registration numbers, real policy numbers or bank accounts.

    Requirements

    The insurance-claim-mcp MCP server: claude mcp add insurance-claim -- uvx insurance-claim-mcp (or the equivalent uvx insurance-claim-mcp stdio config in any MCP client).

    Source: https://github.com/seothief/insurance-claim-mcp

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.

    Requires the insurance-claim-mcp MCP server. Korean policies only (a separate skill covers US supplemental plans). 실손 indemnity rules are not calculated yet (NOT_EVALUATED). A rider is calculated only when it comes from a policy certificate and its payment terms are recorded. Estimates only, not payout decisions.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 15 days ago

    • Free with an Agensi account

    Software
    insurance-claim-mcp (MCP server)uv (Python tool runner)

    Permissions

    Network Access

    Network access is only used by uvx to download the insurance-claim-mcp package from PyPI. The server runs locally and stores data in local SQLite; nothing is sent to any other service.

    Listed15 days ago

    What's inside

    Frequently Asked Questions

    The LLM only reads the documents and talks to you. Every amount comes from a deterministic rule engine in the local insurance-claim-mcp server, and anything your policy certificate doesn't confirm comes back NOT_EVALUATED instead of a guessed number.

    It is compatible with any AI agent or platform that supports the Model Context Protocol (MCP), though it requires the 'insurance-claim-mcp' server to be installed in your local environment to handle calculations and data storage.

    It recognizes all four 실손 generations and KCD codes, but the generation-specific deductible rules are still being checked against policy wording, so 실손 currently returns NOT_EVALUATED with the reason. Fixed-benefit riders (fracture, surgery, ER, inpatient daily and more) are calculated once their payment terms from your policy certificate are recorded.

    For security and privacy, the skill stores your policy details and rider mappings in a local SQLite database on your machine rather than a cloud server, ensuring your financial data stays under your control.

    Both are free. This listing is the SKILL.md workflow your agent follows. The insurance-claim-mcp server it needs is a separate free, MIT-licensed package you run locally with `uvx insurance-claim-mcp`.

    No. Results are informational estimates calculated only from rules your policy certificate confirms. The insurer's review decides whether and how much is paid.

    New in Agents & Orchestration

    Free