hw system review

    1

    Standardized hardware design review flow with engineering calculators for power, thermal, and PCB layout verification.

    $10

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    hw system review

    Example session with this skill installed

    Perform a thermal and derating check for a power MOSFET. Dissipation is 8W, ambient temp is 45C, Rjc 1.2, Rcs 0.5, Rsa 4.0. Voltage is 21V on a 25V rated part. Limit is 0.8.

    • Read your context and instructions
    • Compiled the hw system review

    I have completed the S4 Thermal and Reliability assessment for the specified MOSFET using the hardware calculation toolkit. ## Thermal and Derating Assessment Report ### 1. Calculation Results | Parameter | Value | Formula/Method | Result | | :--- | :--- | :--- | :--- | | **Junction Temp (Tj)** | 90.6°C | Ta + Pd * (Rjc + Rcs + Rsa) | **PASS** (Assuming Tj_max 125°C) | | **Voltage Stress** | 0.84 | Applied / Rated (21V / 25V) | **FAIL** (Limit: 0.80) | | **Total Thermal Resistance** | 5.7 °C/W | Rjc + Rcs + Rsa | - | ### 2. S4 Reliability Findings - **[P0] Derating Violation**: The voltage stress ratio (0.84) exceeds the project limit of 0.80. Operating a 25V MOSFET at 21V provides insufficient margin for inductive spikes or transient surges. - **[P1] Thermal Margin**: Tj is calculated at 90.6°C. While below a typical 125°C or 150°C limit, the junction-to-ambient path is heavily dependent on the RSA (heatsink) performance. ### 3. Verification & Logic The junction temperature was derived using the `thermal` command: `python3 scripts/hw_calc.py thermal --pd 8 --ta 45 --rjc 1.2 --rcs 0.5 --rsa 4.0`. The derating check used the `derating` command: `python3 scripts/hw_calc.py derating --rated 25 --applied 21 --limit 0.8 --kind voltage`. **Next steps** - Replace the MOSFET with a 30V or 40V rated alternative to meet the 0.80 derating requirement. - Verify the Rsa (case-to-ambient) value against the actual heatsink datasheet or local copper pour area. - Add an RC snubber if high-frequency switching transients are expected on the 21V rail.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    High-stakes hardware design demands more than casual checks. This skill provides a structured framework for board-level engineering reviews, moving from architecture and power trees to thermal analysis and DFM. It eliminates guesswork by forcing a staged review process supported by a dedicated Python-based calculator for physical parameters. ## What it does - **Staged review flow** executes a mandatory six-step sequence covering architecture, schematics, PCB layout, thermal reliability, DFM/DFT, and bring-up planning. - **Parametric calculations** provides precise values for trace width, via current capacity, power budgets, junction temperatures, and target impedance using IPC-2221 logic. - **Risk classification** categorizes every finding into P0, P1, or P2 priority levels to prevent critical blockers from reaching production. - **Derating verification** validates component stress levels against rated limits for voltage, current, and power. - **Reporting automation** generates structured design review gate documents (DR1/DR2/DR3) and DFMEA inputs. ## How it works 1. **Initialize review** by selecting one of the six stages (S1-S6) to load the relevant checklist and reference criteria. 2. **Execute calculations** using the `hw_calc.py` script to verify trace geometry, thermal resistance, or decoupling requirements. 3. **Audit findings** against the provided checklists for schematics, signal integrity, and manufacturing constraints. 4. **Generate report** using the fixed template to summarize Go/No-Go decisions and critical risk items. ## Frameworks & tools This tool uses a standard-library-only Python 3 calculator for core engineering physics. It relies on Markdown-based checklists and templates compatible with any git-based documentation workflow or engineering notebook. ## Why this beats prompting it yourself Generic AI often gives qualitative advice or ignores physical constraints like copper weight and thermal resistance. This skill enforces a professional hardware lifecycle that treats engineering as a series of verifiable gate reviews rather than just a chat conversation. ## Use cases - **Pre-layout review** to validate power trees and timing margins before starting PCB routing. - **Reliability auditing** to check component derating and junction temperatures for industrial or high-heat environments. - **Manufacturing prep** to run DFM/DFT checks and ensure test coverage before releasing files to the fab house. - **Root cause analysis** to systematically investigate board failures by working backwards through the staged review flow. ## Known limitations Calculations are approximations based on standards like IPC-2221 and simple thermal resistance models. It does not replace full 3D FEM simulation or sign-off from a certified compliance body.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.

    Calculations are approximations (e.g. IPC-2221). Requires Python 3 for the calculator script. Does not perform automated EDA file parsing; manual input of parameters is required.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 13 days ago

    Permissions

    Terminal / Shell
    Read Files
    Listed13 days ago

    What's inside

    Frequently Asked Questions

    Standardized hardware design review flow with engineering calculators for power, thermal, and PCB layout verification.

    This skill uses the open SKILL.md standard. Use it through an MCP-compatible agent connected to Agensi, and check the compatibility information on this page for confirmed agents and required capabilities.

    Connect your AI agent to Agensi through MCP, then ask it to use hw system review on your task. Your agent loads the latest approved version each time. Paid skills require a purchase or active subscription. Skill files are not available for download; your licence does not allow you to save, copy or export any part of a skill.

    New in Agents & Orchestration