- Home
- Skills
- Legal & Compliance
- HSE Guardian Pro
Works with the AI Agents you already use
HSE Guardian Pro
HSE Guardian Pro is an advanced AI-powered industrial safety assistant designed for HSE officers, safety managers, contractors and port operations teams.
$29
HSE Guardian Pro
Example session with this skill installed
I am an HSE Officer working at a commercial seaport terminal. Our maintenance team is planning maintenance work on a conveyor belt system.
Please act as an experienced industrial HSE specialist and prepare a comprehensive Job Safety Analysis (JSA) for this activity.
Include
- Break the maintenance activity into logical work steps.
- Identify all potential hazards and credible consequences.
- Identify personnel who may be exposed to each hazard.
- Evaluate initial risk using a 5×5 likelihood and severity matrix.
- Recommend additional controls following the hierarchy of controls.
- Calculate preliminary residual risk after proposed controls, clearly identifying assumptions.
- Include electrical isolation, lockout/tagout, stored energy, unexpected start-up, nip points, working at height, dropped objects and simultaneous operations where relevant.
- Identify required PPE and safety equipment.
- Include emergency arrangements and specific stop-work conditions.
- Prepare a corrective action list with responsible roles and verification requirements.
Present the results in a professional table suitable for an industrial safety review.
Important: Do not assume that equipment has been isolated, permits have been approved or controls have been implemented. Clearly identify missing information and items requiring competent-person verification. Use an illustrative risk matrix only if an approved company matrix is not provided.
Finally, provide a pre-job safety checklist and a toolbox talk outline for the maintenance team.
- Read your context and instructions
- Compiled the hse guardian pro
HSE GUARDIAN PRO
Job Safety Analysis (JSA) – Conveyor Belt Maintenance at Commercial Seaport Terminal
Document Type: Preliminary Job Safety Analysis
Activity: Conveyor Belt Maintenance
Work Area: Seaport Cargo Handling Terminal
Assessment Type: Initial and Proposed Residual Risk Assessment
Prepared For: HSE Department / Maintenance Team
Status: Draft – Requires Competent-Person Review
- Executive Summary
This Job Safety Analysis identifies potential hazards associated with conveyor belt maintenance operations at a commercial seaport terminal.
The assessment considers unexpected equipment start-up, electrical hazards, stored mechanical energy, moving components, nip points, working at height, dropped objects, housekeeping and simultaneous operations.
The primary safety objective is to prevent personnel injury, equipment damage and operational disruption through effective hazard identification, energy isolation, engineering controls, safe work practices and emergency preparedness.
Critical safety requirement: Maintenance must not commence until the required permit, isolation, lockout/tagout and zero-energy verification have been completed and confirmed by authorized personnel.
- Risk Assessment Methodology
An illustrative 5×5 risk matrix is used because the organization's approved risk matrix has not been supplied.
Risk Score = Likelihood × Severity
Score| Risk Level
1–4| Low
5–9| Moderate
10–16| High
17–25| Extreme
Likelihood
1 – Rare, 2 – Unlikely, 3 – Possible, 4 – Likely, 5 – Almost Certain.
Severity
1 – Insignificant, 2 – Minor, 3 – Moderate, 4 – Major, 5 – Catastrophic.
These bands are illustrative only and are not universal acceptance criteria.
- Detailed Job Safety Analysis
Work Step| Identified Hazard| Potential Consequence| Initial Risk| Proposed Control Measures| Proposed Residual Risk
- Pre-job preparation| Inadequate planning and coordination| Personnel exposure to uncontrolled hazards| 3×4 = 12 High| Conduct pre-job briefing, review approved JSA, confirm work scope, responsibilities, PTW requirements and simultaneous operations| 1×4 = 4 Low
- Electrical isolation| Electrical shock or unexpected energization| Electrocution, burns or fatal injury| 4×5 = 20 Extreme| Identify all energy sources, isolate through authorized personnel, apply personal locks and tags, and verify zero-energy state using approved procedures| 1×5 = 5 Moderate
- Mechanical isolation| Stored energy and unexpected conveyor movement| Crushing, amputation or fatal injury| 4×5 = 20 Extreme| Isolate all relevant drives and mechanical energy sources, release or restrain stored energy, prevent belt movement and verify isolation| 1×5 = 5 Moderate
- Access to conveyor| Slippery surfaces, inadequate lighting and obstructions| Slips, trips and falls| 3×3 = 9 Moderate| Clear access routes, provide adequate lighting, inspect access platforms and maintain good housekeeping| 1×3 = 3 Low
- Maintenance activity| Nip points, sharp edges and moving components| Crushing, cuts and serious hand injuries| 4×4 = 16 High| Maintain verified isolation, control access, use suitable tools and keep guards removed only under controlled maintenance conditions| 1×4 = 4 Low
- Working at height| Unprotected edges and unsafe access| Serious injury or fatal fall| 3×5 = 15 High| Use approved access platforms, suitable fall-prevention systems and inspected equipment. Provide a task-specific rescue arrangement where required| 1×5 = 5 Moderate
- Tools and materials handling| Dropped objects and falling tools| Head injuries and damage to equipment| 3×4 = 12 High| Establish exclusion zones, secure tools and materials, prevent overhead work conflicts and use suitable tool-control arrangements| 1×4 = 4 Low
- Simultaneous operations| Nearby cargo handling and mobile equipment movement| Struck-by incidents and personnel exposure| 4×4 = 16 High| Coordinate with terminal operations, segregate the maintenance area, establish communication and suspend conflicting activities where necessary| 1×4 = 4 Low
- Testing and reinstatement| Premature energization and personnel remaining in danger zones| Crushing, entanglement or fatal injury| 4×5 = 20 Extreme| Account for personnel and tools, reinstall guards, conduct authorized hand-back, clear exclusion zones and follow approved controlled restart procedures| 1×5 = 5 Moderate
Important: The risk scores above are illustrative planning estimates, not measured site risks. Residual scores represent proposed outcomes only. They must not be treated as achieved risk reduction until controls are implemented and verified.
- Critical Safety Controls
A. Lockout/Tagout (LOTO)
- Identify all electrical and mechanical energy sources.
- Confirm isolation points using approved equipment documentation.
- Apply personal locks and warning tags according to site procedures.
- Release, restrain or otherwise control stored energy.
- Verify the zero-energy state through the approved verification method.
- Never remove another person's lock without following the authorized exceptional-removal procedure.
B. Working at Height
- Avoid working at height where the task can be safely performed from ground level.
- Use suitable inspected access platforms.
- Maintain safe access and edge protection.
- Use appropriate fall-protection systems where required.
- Confirm rescue arrangements before commencing work.
C. Dropped Object Prevention
- Establish exclusion zones below overhead maintenance.
- Secure tools and loose materials.
- Avoid simultaneous activities beneath the maintenance area.
- Maintain effective housekeeping.
D. Simultaneous Operations (SIMOPS)
- Coordinate with the terminal operations team.
- Identify nearby cargo-handling and vehicle movements.
- Establish clear communication between maintenance and operations personnel.
- Stop conflicting activities where safe separation cannot be maintained.
- Required PPE and Safety Equipment
PPE / Equipment| Purpose
Safety helmet| Head protection
Safety shoes| Foot protection
High-visibility vest| Personnel visibility
Safety goggles| Eye protection
Suitable hand gloves| Protection against task-specific mechanical hazards
Hearing protection| Where noise assessment requires it
Full-body harness| Where appropriate for fall-protection arrangements
Lockout/tagout equipment| Energy isolation control
Safety barriers and warning signage| Work-area segregation
Suitable portable lighting| Visibility in poorly illuminated areas
PPE must be selected based on the actual task risk assessment and site requirements.
- Emergency Preparedness
Before work starts, confirm:
- Emergency alarm and communication arrangements.
- First-aid facilities and trained first-aiders.
- Emergency access and evacuation routes.
- Rescue arrangements for work at height.
- Availability of appropriate fire protection.
- Emergency coordination with the terminal control room.
- Reporting and escalation procedures.
Do not attempt an unplanned rescue or enter an unsafe area without trained responders and an approved rescue arrangement.
- Corrective and Preventive Action Plan
No.| Action Required| Responsible Role| Priority| Verification Evidence
1| Verify all energy isolation points and complete LOTO| Authorized Electrical / Maintenance Personnel| Critical| Isolation and verification records
2| Inspect conveyor access platforms and guardrails| Maintenance Supervisor| High| Inspection checklist
3| Establish a barricaded maintenance zone| Area Supervisor| High| Site inspection
4| Coordinate and control simultaneous operations| Terminal Operations Supervisor| High| Coordination record
5| Conduct a task-specific toolbox talk| HSE Officer| High| Briefing record
6| Verify reinstatement and guarding before restart| Authorized Maintenance Personnel| Critical| Handover and inspection record
Owners and target completion dates must be assigned by the responsible site management team.
- Stop-Work Conditions
Immediately stop the affected activity and escalate if:
- Electrical or mechanical isolation cannot be verified.
- Unexpected conveyor movement or stored energy is identified.
- Unauthorized personnel enter the exclusion zone.
- Required permits or critical controls are unavailable.
- Access equipment or fall-protection arrangements are defective.
- Communication between maintenance and operations fails.
- Weather or environmental conditions exceed approved operating limits.
- The work scope changes without reassessment.
- Pre-Job Safety Checklist
- Approved work scope and method statement reviewed.
- Site-specific JSA and risk matrix confirmed.
- Required PTW issued by authorized personnel.
- Energy sources identified and isolated.
- LOTO applied and zero-energy verification completed.
- Barricading and warning signage installed.
- Access equipment inspected.
- PPE availability and suitability confirmed.
- SIMOPS coordination completed.
- Emergency and rescue arrangements confirmed.
- Toolbox talk completed.
- Workforce understands stop-work authority.
- Toolbox Talk Outline
Topic: Safe Conveyor Belt Maintenance at Seaport Terminal
Key discussion points
- Unexpected conveyor start-up and mechanical energy.
- Electrical isolation and LOTO procedures.
- Hand injury and nip-point hazards.
- Safe access and working at height.
- Dropped-object prevention.
- Interaction with cargo-handling equipment.
- Emergency response and stop-work authority.
Questions for workers
- What should you do if the conveyor unexpectedly starts moving?
- How do you confirm that isolation has been verified?
- What precautions are necessary before removing conveyor guards?
- Who should be informed if the work scope changes?
- Final HSE Review and Authorization
This document is a preliminary JSA generated for planning and review.
Before work commencement, the responsible competent personnel must:
- Verify actual site conditions and equipment-specific hazards.
- Confirm the approved company risk matrix.
- Review the method statement and permit requirements.
- Verify all critical safety controls.
- Confirm emergency and rescue arrangements.
- Conduct workforce consultation and obtain required approvals.
HSE Guardian Pro Recommendation
The most significant hazards in this activity are unexpected energization, stored mechanical energy and contact with moving conveyor components. Verified energy isolation and controlled reinstatement should receive the highest priority.
FINAL STATUS: DRAFT – NOT APPROVED FOR WORK EXECUTION.
Generated by: HSE Guardian Pro – Industrial Safety Intelligence
Document Classification: Preliminary Safety Assessment
Review Authority: Authorized Site HSE and Maintenance Management
AI-generated content must be verified against applicable legislation, port regulations, company procedures and actual site conditions before operational use.
Connects securely to your tools. The creator never sees your data.
About this skill
HSE Guardian Pro is an advanced AI-powered industrial safety assistant designed for HSE officers, safety managers, contractors and port operations teams. It helps generate professional safety observations, configurable risk assessments, JSA/JHA documents, permit-to-work reviews, incident investigation reports, CAPA registers, toolbox talks and marine safety checklists. Includes standalone Python utilities for preliminary risk calculations and CAPA register validation.
Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Legal & Compliance.
Cannot certify equipment or issue permits. Does not replace statutory site inspections. Calculations are for preliminary screening. No medical or legal authority.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before buying a skill.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Money-back guarantee
Doesn't do what its page promises? You get your money back.
Trust & safety
Security scan
Security scan passed 2 days ago
- Software
Python 3.8+
Thank you for purchasing HSE Guardian Pro! Start by describing your safety task or operational scenario. For best results, provide site-specific details and follow your organization's approved HSE procedures. All outputs require competent-person review before implementation.