- Home
- Skills
- Workflow Automation
- Homey Pro Health Check
Works with the AI Agents you already use
Homey Pro Health Check
Read-only health check of your Homey Pro with a prioritized fix list, using a read-only API key you create yourself.
$2
Homey Pro Health Check
Example session with this skill installed
Health check my Homey Pro. The key file is saved as homey-key.txt and the Homey is at 192.168.1.50.
- Read your context and instructions
- Compiled the homey pro health
I ran the read-only collector against your Homey with the key from homey-key.txt. It only sent GET requests to the Homey on your network. Nothing was changed, and the key was not printed anywhere.
Facts
| Model | Homey Pro (Early 2023) |
| Firmware | 13.5.3, no update available |
| Up since | 7 days (planned update restart) |
| Memory | 1.3 GB of 1.9 GB used, flat over 31 days |
| Power | no undervoltage seen |
| Network | Wi-Fi, signal 90 % |
| Apps | 24 installed, all running |
| Devices | 31, 4 unavailable |
Assessment
- Stability: good. No outages in the last 31 days and no unplanned restarts.
- Backup: needs attention. A backup failed on 15 October and no successful backup is recorded since.
Devices: needs attention. 4 devices are unavailable: a temperature sensor (no data since 8 April), an outdoor sensor (no data since 20 October), a Pi-hole device ("could not be reached") and a media player ("connection error").
- Batteries: low. Two water sensors do not report a battery level, so you cannot tell when they run out.
- Flows: good. 15 flows, 1 disabled (a leftover "example").
- Zigbee: good. Ready, 14 nodes, no errors. Z-Wave: not in use.
- Integrations: check. Google Assistant sync was switched off by an error on 19 October.
- Tidiness: info. 6 devices have no room and 2 rooms are empty.
Prioritized actions
Good as it is: firmware, memory, power, Wi-Fi, Zigbee, apps, flows.
Should change
1.
Fix the failed backup. Homey app > More > Backups: check the error, make a manual backup, and confirm that automatic backup is on.
2.
Replace or re-pair the dead sensors. The one silent since April has probably lost its battery or pairing; the outdoor sensor went quiet on 20 October.
3. Re-enable Google Assistant sync. Settings > Google Assistant, then check the connection.
Check: the Pi-hole device's connection settings, and give the two water sensors a battery check by hand.
Good to know: move the 6 room-less devices into rooms so flows and the app stay tidy.
Sources
- Homey Pro firmware release notes: https://homey.app/en/news/
Findings saved to ~/.home-health-check/findings/. Want me to go through the backup problem first? Fixes are steps you do in the Homey app; I change nothing on the Homey.
Connects securely to your tools. The creator never sees your data.
About this skill
Reads your Homey Pro through its local API with a read-only key you create, and checks firmware and app updates, crashed or stopped apps, restarts and outages over the last month, memory trend and undervoltage, Wi-Fi signal, devices that are unavailable or have stopped reporting, low batteries and safety sensors without a battery report, broken and disabled flows, Zigbee and Z-Wave state, backup errors, integrations that switched themselves off, and tidiness (devices without a room, empty rooms). Ends with a prioritized fix list of steps in the Homey app.
Works on its own. With the other Home Health Check skills it shares one private data folder, and the Home Network Report combines everything into one fix list. Open source (MIT).
Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Workflow Automation.
Tested on Homey Pro (Early 2023); other Homey Pro models are reported as untested. Homey Bridge and Homey Cloud have no local API and are not supported. The key crosses your home network unencrypted (the Homey has no local HTTPS), so run it on a network you trust and delete the key afterwards. Fixes are steps you do in the Homey app; the skill changes nothing on the Homey.
How to use
- 1
Connect your agent to the Agensi MCP
Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup
- 2
Sign in to Agensi
Your agent shows a sign-in link. Sign in and click Allow.
- 3
Ask for what you need
Your agent loads this skill and uses it on your task. It always asks before buying a skill.
Reviews
No reviews yet
Be one of the first to try it. Every listed skill goes through the trust checks below.
Security scanned
Checked by our 8-point scan before listing
Fresh listing
Recently published to Agensi
Money-back guarantee
Doesn't do what its page promises? You get your money back.
Trust & safety
Security scan
Security scan passed 18 days ago
- Accounts
Homey
Permissions
Allowed Hosts
File Scopes
aTerminal: runs the bundled read-only collector (PowerShell on Windows, bash on macOS/Linux), no admin rights or sudo. Key: you create a read-only API key in the Homey web app and save it in a file; the collector reads the first line and sends it only to your Homey as a request header. It is never printed, never put in the chat or on a command line, and never read from an environment variable. Network: GET requests only to the Homey on your LAN, over plain HTTP because the Homey has no local HTTPS, no proxy and no redirects. Files: the collector writes nothing; the skill writes the findings and updates the Homey's inventory row in ~/.home-health-check (or HOME_HEALTH_CHECK_DIR, the only environment variable it reads).