Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    high speed optical module engineer

    1

    Senior engineer for optical transceiver design, testing, and troubleshooting from 10G to 800G (SFP/QSFP/OSFP).

    $6.99

    /mo

    Subscription · cancel anytime

    Secure checkout via Stripe

    • Always the latest version
    • Delivered live to your agent via MCP
    • Cancel anytime, access ends at period end
    Security scanned
    high speed optical module engineer

    high speed optical module engineer

    Example session with this skill installed

    Our 400G QSFP-DD DR4 links are showing high post-FEC BER and intermittent link flaps. RX power is -8dBm. What should we check?

    • Read your context and instructions
    • Compiled the high speed optical

    The reported RX power of -8dBm is near the typical sensitivity limit for 400GBASE-DR4, which often ranges between -7dBm and -9dBm depending on the DSP and FEC performance. This indicates a marginal link budget.

    400G QSFP-DD Troubleshooting Report

    MetricAnalysisAction
    RX Power-8dBm is marginal for DR4Inspect for fiber bend loss or dirty MPO connectors.
    FEC StatusHigh post-FEC BERConfirm RS-FEC (KP4) is enabled on the host; verify pre-FEC BER is < 2.4e-4.
    ThermalPotential overheatingCheck DDM temperature; QSFP-DD can reach 12W and requires aggressive cooling.
    Laser BiasPossible TX degradationCheck TX Bias current in DDM to ensure it is not hitting the EOL limit.
    Signal Type53.125 GBd PAM4Verify host SiPh/DSP FIR settings are optimized for the trace length.

    Next steps
    1.

    Clean and Inspect: Use a fiber scope on the MPO-12 connectors; even minor dust causes significant PAM4 signal degradation.
    2.

    Loopback Test: Perform an electrical and optical loopback to isolate if the issue is the module or the fiber plant.
    3. Firmware Check: Ensure the CMIS version on the module is compatible with the host port's management stack.

    $6.99/mo

    Subscription · always the latest version

    • Secure checkout via Stripe
    • Cancel anytime
    • Delivered live via MCP

    About this skill

    Design and troubleshooting for high-speed optical transceivers involves navigating a complex web of MSA standards, thermal constraints, and signal integrity issues. Small errors in FEC configuration or laser calibration lead to link failure and high BER. This skill provides the technical precision of a senior optical engineer to guide design, validation, and field operations.

    What it does

    • Standard compliance validates designs against IEEE 802.3 and MSA specifications including CMIS and SFF-8472.
    • Troubleshooting diagnosis identifies root causes for link flaps, no-link scenarios, and high BER across SFP to OSFP form factors.
    • Parameter optimization provides guidance on tuning TX power, extinction ratio, eye mask margin, and DDM calibration.
    • Component selection assists in choosing TOSA, ROSA, and DSP components for data rates from 10G to 800G.
    • Thermal analysis calculates power budgets and cooling requirements for high-density modules like QSFP-DD.

    How it works

    1. Identify parameters by providing the form factor, data rate, and reach type.
    2. Diagnose issues using DDM/DOM alarm data such as TX bias current or RX power levels.
    3. Reference standards to ensure hardware meets specific IEEE or MSA protocol requirements.

    Frameworks & tools

    Knowledge base covers IEEE 802.3ae/ba/bj/bs/ck/df, SFF-8431, SFF-8636, and CMIS. Expertise spans VCSEL, DFB, EML lasers, and PAM4/NRZ signaling.

    Why this beats prompting it yourself

    Generic AI lacks the specific thresholds for optical link budgets and fiber-specific nuances. This skill applies specialized knowledge of laser aging, FEC thresholds, and MSA management interfaces that general models often hallucinate or oversimplify.

    Use cases

    • Diagnose 400G link failures by analyzing DDM metrics and FEC statistics.
    • Compare QSFP-DD versus OSFP thermal and density trade-offs for 800G upgrades.
    • Draft production test plans for 100G LR4 modules including calibration steps.
    • Troubleshoot transceiver-host compatibility and firmware handshake issues.

    Known limitations

    Does not perform real-time optical simulation or PCB layout routing. Requires manual input of DDM/DOM diagnostic values for troubleshooting.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for APIs & Backend.

    Does not perform real-time optical simulation or PCB layout routing. Requires manual input of DDM/DOM diagnostic values for troubleshooting.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 22 days ago

    Permissions

    No special permissions declared or detected

    Listed22 days ago

    What's inside

    Frequently Asked Questions

    The skill supports a wide range of form factors including SFP, SFP+, QSFP+, QSFP28, QSFP-DD, and OSFP, covering data rates from legacy 10G NRZ up to cutting-edge 800G PAM4 links.

    By analyzing DDM/DOM data like TX bias, RX power, and temperature, the skill can pinpoint root causes such as laser degradation, fiber attenuation, or host-module firmware mismatches that cause link flaps.

    Yes, the skill is built on a deep understanding of MSA standards like CMIS and SFF-8636, allowing it to provide specific guidance on register mapping and management interface handshakes.

    The skill provides expert-level engineering guidance, component selection advice, and diagnostic analysis, but it does not perform live PCB routing or active optical simulations.

    You will receive full access to the AI agent skill, which includes the specialized knowledge base for IEEE 802.3 standards, link budget calculators, and diagnostic frameworks for optical engineering.

    The skill is regularly updated to reflect the latest industry developments, including emerging 800G/1.6T standards and new IEEE 802.3df specifications as they are ratified.

    New in APIs & Backend