GS

    goodwe semsplus analyst

    0

    Turn GoodWe SEMS+ readings into clear live-flow and daily solar and battery summaries, including cautious charge-start and pre-charge discharge estimates.

    Free

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more
    GS

    goodwe semsplus analyst

    Example session with this skill installed

    Analyze the battery behavior for June 12th from the attached SEMS+ chart data. When did charging start and how much did we discharge before then?

    • Read your context and instructions
    • Compiled the goodwe semsplus analyst

    I have analyzed the SEMS+ chart data for Station ID: 88291 (Timezone: AEST) for 2024-06-12.

    Battery Behavior Analysis - 2024-06-12

    The analysis is based on 5-minute interval samples from the pBat (kW) and soc (%) metrics.

    MetricStart TimeValue / Total
    First Charging Run08:15:00-0.45 kW (SOC 12%)
    Pre-Charge Discharge00:00:00 - 08:10:002.14 kWh (Estimated)
    Total Day DischargeFull Day6.40 kWh (Portal Stat)
    Total Day ChargeFull Day7.20 kWh (Portal Stat)

    Power Flow Details

    Initial State: The battery began the day at 18% SOC, discharging at a mean rate of 0.3 kW to cover overnight base loads.
    *

    Charging Start: Sustained charging (negative pBat) was first detected at

    08:15:00. The sample prior (08:10:00) showed a final discharge of 0.12 kW.
    *

    Estimation Logic: The pre-charge discharge of

    2.14 kWh was calculated by integrating positive power samples from local midnight until 08:10:00.

    • Data Gaps: No significant gaps were detected in the 5-minute telemetry stream for this period.

    Next steps

    1. Cross-reference the 2.14 kWh estimate with your inverter's proDischarStats for the same window if available.
    2. Check the pSystem readings for 08:15:00 to see if charging was triggered by solar overhead or a scheduled grid charge.
    3. Upload the get_device_telemetry log if you need to check inverter temperatures during the peak charge window.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Solar monitoring software often leaves you guessing about the specifics of your battery behavior and energy flow. This skill bridges the gap by analyzing GoodWe SEMS+ data to provide precise insights into system performance, charge cycles, and inverter telemetry. It processes raw readings from connected MCP servers or user-supplied screenshots and exports to clarify exactly where your power is going.

    What it does

    • Live flow analysis interprets current solar, battery, grid, and household power metrics.
    • Charge cycle detection identifies the exact start of battery charging using sustained power samples.
    • Pre-charge discharge estimation integrates battery power readings to calculate energy used before the first charge.
    • Historical synthesis compares daily solar production, consumption, and grid exchange totals.
    • Telemetry breakdown extracts device-specific data like chamber temperature and DC input without guessing undocumented codes.

    How it works

    1. Connect data source via the goodwe-semsplus MCP server for live queries or by providing screenshots and CSV exports.
    2. Select query scope using specific commands for live flow, historical stats, or detailed device telemetry.
    3. Analyze battery timing by resolving station timezones and identifying sustained negative power samples.
    4. Generate report featuring compact tables of measured values, portal summaries, and calculated estimates.

    Frameworks & tools

    This skill interfaces with the GoodWe SEMS+ portal and is optimized for use with the goodwe-semsplus-mcp server. It processes JSON telemetry and chart data formatted in YYYY-MM-DD HH:mm:ss.

    Why this beats prompting it yourself

    Standard prompts often fail to correctly interpret the sign of battery power or distinguish between DC PV input and AC output. This skill applies specific logic to identify sustained charging runs and integrates power samples over time for accurate kWh estimates that generic models miss.

    Use cases

    • Auditing daily battery performance to verify charging start times.
    • Comparing solar generation income estimates against grid feed-in statistics.
    • Monitoring inverter chamber temperatures during peak production periods.
    • Reconciling household consumption metrics from historical SEMS+ exports.

    Known limitations

    Does not diagnose electrical faults or provide safety recommendations. Requires legible timestamps for manual screenshot analysis. Calculations from charts are estimates and may not match utility meters.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse All Claude Skills.

    Cannot diagnose electrical faults. Calculation accuracy depends on chart sample intervals. Requires an external MCP server for live data access.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 4 days ago

    • Free with an Agensi account

    Software
    Goodwe Semsplus MCPGit

    Permissions

    Terminal / Shell
    Network Access
    Environment Variables
    Listed4 days ago

    What's inside

    Frequently Asked Questions

    This skill solves the 'guesswork' in standard solar monitoring by calculating precise energy flow, detecting exact battery charge start times, and reconciling consumption data that general AI models often misinterpret.

    It is optimized for use with the `goodwe-semsplus-mcp` server for live data, but it also supports manual analysis via uploaded screenshots or CSV exports from the SEMS+ portal.

    The skill is compatible with any AI agent or platform that supports MCP (Model Context Protocol) tool integration or can process complex data analysis prompts.

    The analyst uses specific logic to interpret battery power signs (positive vs. negative) and integrates power samples over time to provide kWh estimates that are far more accurate than simple text-based prompting.

    You receive the specialized logic for energy flow analysis, documentation for connecting to the GoodWe MCP server, and a set of optimized commands for generating detailed performance reports.

    No, this skill is designed for performance auditing and data synthesis; it is not a diagnostic tool for electrical faults or a substitute for professional solar maintenance.

    Free