Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    gdsfactory Photonic Layout Assistant

    1

    Create and edit photonic layout prototypes with a local gdsfactory MCP Server. Inspect ports, connect and route components, check geometry, and export GDS, editable JSON, and annotated PNG previews.

    Free

    Security scanned

    gdsfactory Photonic Layout Assistant

    Example session with this skill installed

    Create a 500 um long, 800 nm wide straight waveguide connected to a 20 um linear taper ending at 500 nm. Use the generic demonstration PDK, keep the two far-end ports external, check the design, and export GDS, editable JSON, and an annotated PNG. Preserve any existing unsaved design first.

    • Read your context and instructions
    • Compiled the gdsfactory photonic layout

    Summary

    Created a generic-PDK straight waveguide connected to a linear taper. The reproducible stdio MCP demonstration produced GDS, editable JSON, and an annotated PNG, which was visually inspected.

    Layout

    ItemGeometry
    wg1Straight waveguide, length 500 um, width 0.8 um
    taper1Linear taper, length 20 um, input width 0.8 um, output width 0.5 um
    Connectionwg1.o2 directly connected to taper1.o1
    External portswg1.o1 and taper1.o2
    Overall optical path520 um along the straight axis

    Deliverables

    • build/straight_taper.gds: generated layout geometry.
    • build/straight_taper.json: editable design description.
    • build/straight_taper.png: annotated preview with component names, port names, and layer information.

    Verification

    The design check allowed export with no blocking errors. The far-end ports are intentional external interfaces. Dimensions use micrometres in the saved JSON; dedicated *_um creation arguments were used to avoid ambiguity. A separate recovery test verified that invalid input leaves the design unchanged, existing export files are protected, and unsaved work blocks replacement until saved.

    Next steps

    Review the annotated preview and open the GDS in your layout viewer. This is geometric prototyping with the generic demonstration PDK; successful export does not establish taper adiabaticity, insertion loss, foundry DRC compliance, or fabrication readiness.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    From design intent to checked layout files

    Guide your AI agent through photonic layout prototyping with Poppy1517's local gdsfactory MCP Server. Discover supported components, read live parameter schemas, handle nanometre and micrometre inputs, inspect actual ports, and choose direct connections or fixed-position waveguide routing.

    Included

    • A workflow for creating, editing, saving, checking, and exporting layouts.
    • Explicit unit rules, error recovery, and protection for existing designs and files.
    • Local server setup and client configuration templates.
    • Three worked recipes: straight waveguide plus taper, bent route, and an MMI 1x2 circuit.
    • Export guidance for GDS, editable JSON, and annotated PNG previews.

    Requirements

    A separately installed and connected local stdio gdsfactory MCP Server, Python 3.12+, uv, and a compatible client with access to the server host. Agensi delivers the instructions; it does not install or host the layout server.

    Validation and scope

    Three real stdio MCP recipes produced GDS, JSON, and PNG with gdsfactory 9.51.0. Additional tests covered parameter updates, save/load roundtrips, invalid-input recovery, unsaved-state protection, and export file/path protection. The three previews were visually inspected.

    Uses the generic demonstration PDK for education and geometric prototyping. Does not provide foundry DRC, optical simulation, custom LN PDK support, fabrication qualification, or guaranteed optical performance. Client-specific setup has not been tested in every agent.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Agents & Orchestration.

    Requires a running local gdsfactory-mcp server. Supports only the generic PDK. No optical simulation or foundry DRC capability.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Free to use

    No account required to browse

    Trust & safety

    Security scan

    Security scan passed 1 day ago

    • Free with an Agensi account

    Software
    Gdsfactory MCPPythonGituv (Python tool runner)

    Permissions

    Read Files
    Write Files
    Network Access
    Terminal / Shell
    Listed1 day ago

    What's inside

    Frequently Asked Questions

    The skill guides the agent to inspect live schemas, use explicit length units, inspect real ports, and review supported design checks before export. It reduces common layout mistakes but does not guarantee error-free or fabrication-ready geometry.

    Install and connect the local gdsfactory MCP Server separately, with Python 3.12+, uv, and a client that supports local stdio MCP. Agensi supplies instructions, not a hosted server. Loading this skill does not automatically install or connect the server.

    Currently, the skill is optimized for the gdsfactory generic silicon photonics PDK; support for proprietary foundry PDKs or alternative materials like lithium niobate is not available in the current version.

    Yes. The skill tells the agent how to use the connected server to inspect port names, widths, orientations, and layers, then review check findings and repair supported mismatches. The tools are provided by the server, and some issues require the user to clarify design intent.

    The free package includes agent instructions, a source-verified tool reference, setup guidance, client configuration templates, and three worked examples with reproducible call sequences. The local MCP Server and its Python dependencies are installed separately and are not included.

    The skill handles layout, routing, and GDS generation, but it does not perform active optical simulations (like FDTD or circuit-level modeling) or final foundry-level Design Rule Checks (DRC).

    New in Agents & Orchestration

    Free