More screenshots

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    Dead Air: Fix One-Way Audio on Asterisk and FreePBX

    1

    Fix one-way audio on Asterisk and FreePBX. Your agent finds the failing leg, compares the IP your PBX advertises with your real one, works through NAT, RTP and SIP ALG, then checks a capture for digital silence.

    $7

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned
    Dead Air: Fix One-Way Audio on Asterisk and FreePBX

    Dead Air: Fix One-Way Audio on Asterisk and FreePBX

    Example session with this skill installed

    FreePBX 17 on a home fibre line behind a router. Since Monday, outside callers can't hear my staff, but staff hear the callers. Nothing changed on our side as far as I know. During a call, pjsip show channelstats shows Receive Count stuck at 0 on the trunk leg and rising on the extension leg. In the INVITE we send to the provider the SDP has c=IN IP4 198.51.100.7, and curl ifconfig.me on the PBX prints 203.0.113.9. What's wrong and what exactly do I do, including so it doesn't come back?

    • Read your context and instructions
    • Compiled the dead air

    Summary

    Your public IP changed, probably an ISP reassignment on Monday, and FreePBX still has the old one. The PBX tells the provider to send audio to 198.51.100.7, so that audio never reaches you, which is why the trunk leg's Receive Count stays at 0.

    One mismatch: 0 on the trunk leg means callers' audio isn't reaching the PBX, so staff should be the ones hearing nothing. Your report is the reverse. Confirm who hears what on the test call.

    What the answer covers

    • Where to correct the address, including the override that people miss.
    • How to apply it without dropping live calls.
    • How to prove the fix from the signalling.
    • What to check next if the count stays at 0.
    • How to stop it coming back when your IP changes again.

    The skill gives your agent the settings, with the bundled sync script.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Most one-way audio comes from NAT, a stale public IP, a blocked RTP range or a router rewriting SIP. Some comes from a phone sending digital silence, which passes every network test. One check separates the two before you change anything.

    Your agent will

    • Read pjsip show channelstats to find which leg receives nothing
    • Compare the address your PBX advertises in the SDP with your real public IP
    • Work through local_net, external addresses, direct media, RTP forwarding, SIP ALG and double NAT
    • Read a call capture and show which G.711 stream holds voice and which holds silence

    You also get a FreePBX script that keeps your External Address current on a dynamic IP line. It requests an Asterisk restart only once no calls are running.

    How it was tested

    We tested the capture script on sample calls in Ethernet and Linux capture formats, and ran the IP sync logic against simulated failures. We haven't yet run it on a live call.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for Testing & Debugging.

    The silence check works on G.711 only. Encrypted SRTP calls can't be judged.
    Not yet tested on a live call.
    The IP sync script is for FreePBX.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 8 days ago

    Accounts
    IpifyIfconfig
    Software
    Shell access to the PBXtcpdumpPython 3

    Permissions

    Terminal / Shell
    Network Access
    Read Files
    Write Files

    Allowed Hosts

    api.ipify.org
    ifconfig.me

    File Scopes

    /etc/asterisk/*
    /tmp/call.pcap

    The capture script reads one local file. One public IP lookup is disclosed in the skill. Captures hold call audio, so the skill asks first and deletes them afterwards.

    Listed8 days ago
    Updated7 days ago

    What's inside

    Frequently Asked Questions

    Yes. FreePBX steps are marked separately.

    Only a short capture that you approve first, and the skill deletes it afterwards.

    Yes. It includes a cron script for FreePBX, and guidance for plain Asterisk.

    New in Testing & Debugging