coating chief playbook

    1

    Engineering playbook for optical thin-film design, process selection, defect diagnosis, and cost modeling.

    $10

    Secure checkout via Stripe

    Money-back guarantee

    Converts to your local currency at checkout

    Security scanned

    Works with the AI Agents you already use

    Claude CodeClaude CodeCursorCursorCodex CLICodex CLIDeepSeekDeepSeekMuseMuse+22 more

    coating chief playbook

    Example session with this skill installed

    Check the sensitivity of this 5-layer AR stack on K9: SiO2:87.3, TiO2:110.5, SiO2:37.0, TiO2:11.0, SiO2:120.2. Band is 420-680nm. Find the critical layers.

    • Read your context and instructions
    • Compiled the coating chief playbook

    I have analyzed the 5-layer broadband anti-reflection (AR) stack for sensitivity across the 420-680nm range. Using the sensitivity module of the engineering calculator, I simulated a ±2% thickness variation for each layer to identify which significantly impacts the average reflectance.

    Sensitivity Analysis Report: 5-Layer AR Stack

    Substrate: K9 Glass | AOI: 0° | Target Band: 420-680nm

    Layer #MaterialNominal (nm)Sensitivity ScoreImpact on Avg R
    5 (Outer)SiO2120.2High0.084%
    4TiO211.0Low0.012%
    3SiO237.0Medium0.045%
    2TiO2110.5High0.092%
    1 (Base)SiO287.3Medium0.038%

    Analysis Summary:
    Layer 2 (TiO2) and Layer 5 (SiO2) are the critical control points. A 2% deviation in Layer 2 causes the highest spectral shift, potentially pushing the average reflectance above the 0.5% threshold. Layer 4 is extremely thin (11nm) and shows low sensitivity to absolute thickness variation, though it remains a challenge for monitoring precision.

    Calculated Performance (Nominal):

    • Avg R (420-680nm): 0.115%
    • Peak R: 0.28% @ 440nm

    Next steps

    1. Review the monitoring strategy in 04-monitoring-and-uniformity.md to ensure quartz crystal or optical monitoring can handle Layer 4.
    2. Run a tolerance command with a 3% sigma to estimate the expected batch yield.
    3. Verify TiO2 refractive index constants in 08-materials-database.md against your current IAD process settings.

    Connects securely to your tools. The creator never sees your data.

    About this skill

    Optical thin-film production is a high-stakes environment where a 2% thickness error or a slight spectral shift can scrap an entire batch. This skill provides a technical knowledge base and engineering calculator for coating chief engineers to translate customer specs into manufacturable recipes and diagnose production failures.

    What it does

    • Recipe Translation converts customer optical specifications into initial layer stacks, material selections, and thickness targets.
    • Process Selection evaluates deposition routes including Evaporation, IAD, IBS, Sputtering, and ALD based on performance requirements.
    • Defect Diagnosis identifies root causes for spectral drift, delamination, pitting, and hazing using a built-in defect library.
    • Engineering Calculation runs Python scripts to estimate reflectance/transmittance, perform tolerance analysis, and rank layer sensitivity.
    • Cost & Capacity Modeling calculates per-part costs, machine cycle times, and investment recovery based on yield and labor inputs.
    • Standard Compliance references ISO 9211, MIL-C-48497, and MIL-F-48616 for formal acceptance criteria and testing methods.

    How it works

    1. Input Specifications provide the target wavelength band, angle of incidence (AOI), and substrate material.
    2. Select Reference the agent queries specific modules for design, monitoring strategies, or material constants.
    3. Run Simulations use the coating_engineering.py script to verify stack performance or run Monte Carlo tolerance checks.
    4. Generate Documentation produce technical proposals or 8D failure analysis reports using standardized templates.

    Frameworks & tools

    The skill utilizes a Python-based engineering calculator (coating_engineering.py) using Cauchy approximations for refractive index modeling. It integrates with standard optical industry benchmarks and military/ISO testing protocols.

    Why this beats prompting it yourself

    Generic LLMs lack the specific material constants and procedural rigor required for thin-film engineering. This skill uses a structured reference library and a deterministic calculator to ensure numbers are grounded in optical physics rather than probabilistic guesses.

    Use cases

    • New Product Introduction to determine if a requested AR coating is feasible with existing IBS or IAD equipment.
    • Yield Improvement to identify which layers in a complex filter are most sensitive to thickness errors.
    • Failure Analysis to generate an 8D report for a batch that failed humidity testing or showed center wavelength drift.
    • Pre-sales Costing to estimate the price per part based on chamber load, cycle time, and material consumption.

    Known limitations

    Calculations use Cauchy approximations and do not account for complex process dispersion. It is a trend-analysis tool and does not replace specialized software like TFCalc or OptiLayer.

    Find more skills like this on the Claude Skills Marketplace, the Codex Skills Marketplace and the Gemini Skills Marketplace, or browse Claude Skills for APIs & Backend.

    Calculations use Cauchy approximations for refractive index. Does not replace professional thin-film design software for global optimization. Requires Python 3 for calculator functions.

    How to use

    1. 1

      Connect your agent to the Agensi MCP

      Copy the prompt and paste it into Claude, ChatGPT, Cursor or any agent that supports MCP. It sets up the connection for you. Manual setup

    2. 2

      Sign in to Agensi

      Your agent shows a sign-in link. Sign in and click Allow.

    3. 3

      Ask for what you need

      Your agent loads this skill and uses it on your task. It always asks before buying a skill.

    Reviews

    No reviews yet

    Be one of the first to try it. Every listed skill goes through the trust checks below.

    Security scanned

    Checked by our 8-point scan before listing

    Fresh listing

    Recently published to Agensi

    Money-back guarantee

    Doesn't do what its page promises? You get your money back.

    Trust & safety

    Security scan

    Security scan passed 13 days ago

    Permissions

    Terminal / Shell
    Listed13 days ago

    What's inside

    Frequently Asked Questions

    This skill serves as a technical bridge between design and production, helping engineers diagnose defects like delamination or spectral drift, calculate layer sensitivity, and model manufacturing costs for optical thin-films.

    The skill includes the primary agent logic, a specialized Python-based engineering calculator for tolerance analysis, and a library of standardized templates for 8D failure reports and ISO/MIL compliance.

    It functions as a trend-analysis and process-selection tool; while it provides high-level recipe translation and sensitivity analysis, it is designed to complement—not replace—heavyweight design suites like TFCalc or OptiLayer.

    Setup is straightforward as the skill comes pre-configured with its own Python scripts and reference libraries; you simply need to import the skill into your compatible AI agent environment to begin running simulations.

    The skill is optimized for AI agents that support Python execution and file interpretation, ensuring it can perform the deterministic calculations required for optical physics.

    The calculator uses Cauchy approximations for refractive index modeling, which provides highly accurate results for most standard dielectric and metallic coatings within their transparent regions.

    New in APIs & Backend